[In case of inadequate ventilation] wear respiratory protection.
Primary route(s) of entry
primary route of entry: Skin contact and eye contact.
Secondary Route of entry: Inhalation, Ingestion (less likely).
Human Health
Inhalation
Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Ingestion
Immediately call a POISON CENTER/doctor. Rinse mouth. Do NOT induce vomiting.
Eyes
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Skin
(or hair) Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. Take off immediately all contaminated clothing and wash it before reuse.
Environment
In case of fire: Use CO₂, powder or water spray for extinction.
Store in a well-ventilated place. Keep container tightly closed.
Store in a well-ventilated place. Keep cool.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
3. Composition / Information on Ingredients
Name
CAS No.
Content (w/w)
Classification
Acetic Acid Glacial
64-19-7
30-60%
Mixture
Sodium Acetate Trihydrate
6131-90-4
30-60%
Mixture
4. First Aid Measures
Ingestion
Do not induce vomiting; call for medical help immediately.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Inhalation
Supply fresh air or oxygen; call for a doctor.
In case of unconsciousness place patient stably in side position for transportation.
Skin Contact
immediately wash with water and soap and rinse thoroughly.
Eye Contact
Rinse opened eye for several minutes under running water. Then consult a doctor.
Other Information
Immediately remove any clothing soiled by the product.
Remove breathing equipment only after contaminated clothing have been completely removed.
In case of irregular breathing or respiratory arrest provide artificial respiration.
5. Firefighting Measures
Suitable extinguishing equipment
Fire
CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
HAZCHEM
No further relevant information available.
Special protective equipment and precautions for fire fighters
Mouth respiratory protective device.
6. Accidental Release Measures
Personal precautions, protective equipment and emergency procedures
Do not allow to enter sewers/surface or ground water.
Methods and materials for containment and clean up
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Use neutralising agent.
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
7. Handling and Storage
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Open and handle receptacle with care.
Prevent formation of aerosols.
Keep ignition sources away - Do not smoke.
Protect from heat.
Protect against electrostatic charges.
Keep respiratory protective device available.
Conditions for safe storage
Keep container tightly sealed.
Protect from heat and direct sunlight.
8. Exposure Controls / Personal Protection
Exposure Standards
Material
TWA ppm
TWA mg/m³
STEL ppm
STEL mg/m³
Acetic Acid Glacial
10ppm
25mg/m³
15ppm
37mg/m³
Engineering controls
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Avoid contact with the eyes.
Avoid contact with the eyes and skin.
Personal protective equipment
Eye and face protection
Tightly sealed goggles.
Skin protection
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of
the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Body protection
Wear protective clothing.
Respiratory protection
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
9. Physical and Chemical Properties
General information
Appearance
Clear liquid
Odour
Pungent
pH
5.2 at 20°C
Vapour Pressure
11.4hPa at 20°C
Density
Not determined.
Boiling Point
100 °C (212 °F)
Melting Point
Undetermined
Solubility
Fully miscible.
Specific Gravity of Density
Not available.
Flash Point
43°C
Flammable (Explosive) Limits
Lower: 4 Vol%
Upper: 19.9 Vol%
Ignition Temperature
427 °C (800.6 °F)
Formula
Not available.
10. Stability and Reactivity
Reactivity
No further relevant information available.
Chemical stability
No decomposition if used according to specifications.
Possibility of hazardous reactions
No dangerous reactions known.
Conditions to avoid
No further relevant information available.
Incompatible materials
No further relevant information available.
11. Toxicological Information
Acute effects
Acetic Acid Glacial
Oral LD50 3310 mg/kg (rat)
Dermal LD50 1060 mg/kg (rabbit)
Eye contact
Strong caustic effect.
Strong irritant with the danger of severe eye injury.
Skin contact
Strong caustic effect on skin and mucous membranes.
Ingestion
Swallowing will lead to a strong caustic effect on mouth and throat and to the danger of perforation of oesophagus and stomach.
Inhalation
No sensitising effects known.
Toxicity and irritation
The product shows the following dangers according to internally approved calculation methods for preparations:
Corrosive
Irritant
Very toxic
Danger through skin absorption.
Swallowing will lead to a strong caustic effect on mouth and throat and to the danger of perforation of esophagus
and stomach.
Interactive effects No interactive effects between components are known.
Carcinogenic categories
IARC (International Agency for Research on Cancer): None of the ingredients is listed.
NTP (National Toxicology Program): None of the ingredients is listed.
OSHA-Ca (Occupational Safety Health Administration): None of the ingredients is listed.
Alternative sources for toxicological information
No non-standard sources for toxicological information where used.
12. Ecological Information
Ecotoxicity
No further relevant information available.
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
No further relevant information available.
Other adverse effects
Water hazard class 1: slightly hazardous for water.
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Must not reach sewage water or drainage ditch undiluted or unneutralised.
13. Disposal Considerations
General information
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Disposal must be made according to official regulations.
Recommended cleansing agents: Water, if necessary together with cleansing agents.
14. Transport Information
ADG label required
Class 3 Flammable liquidClass 6.1 ToxicClass 8 Corrosive