Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/ attention. IF exposed or concerned: Call a POISONCENTER/ doctor.
Skin
Take off immediately all contaminated clothing. Rinse skin with water.
Environment
In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish.
Absorb spillage to prevent material damage.
Store in a well-ventilated place. Keep cool.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Do not allow to enter sewers/ surface or ground water.
Methods and materials for containment and clean up
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to section 13.
Ensure adequate ventilation.
7. Handling and Storage
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols.
Information about protection against explosions and fires:
Keep ignition sources away - Do not smoke.
Protect from heat.
Protect against electrostatic charges.
Conditions for safe storage
Requirements to be met by storerooms and receptacles: Store in a cool location.
Information about storage in one common storage facility: Not required.
Further information about storage conditions:
Keep receptacle tightly sealed.
Store in cool, dry conditions in well sealed receptacles.
Protect from heat and direct sunlight.
Specific end use(s) No further relevant information available.
8. Exposure Controls / Personal Protection
Exposure Standards
Material
TWA ppm
TWA mg/m³
STEL ppm
STEL mg/m³
Ethanol (64-17-5)
200 ppm
260 mg/m³
250 ppm
325 mg/m³
Isopropanol (67-63-0)
-
-
-
40 mg/L
methanol (67-56-1)
-
-
-
15 mg/L
Hydrochloric Acid (7647-01-0)
5 ppm
7 mg/m
-
Engineering controls
No further data; see section 7.
General Protective and Hygienic Measures
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the skin.
Avoid contact with the eyes and skin.
Personal protective equipment
Eye and face protection
Tightly sealed goggles
Skin protection
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Body protection
No further information available
Respiratory protection
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use
respiratory protective device that is independent of circulating air.
9. Physical and Chemical Properties
General information
Appearance
Colourless Liquid
Odour
Characteristic
pH
1.1 - 1.4
Vapour Pressure
59 hPa (44.3 mm Hg) at 20 °C (68 °F)
Density
No data available
Boiling Point
No data available
Melting Point
No data available
Solubility
No data available
Specific Gravity of Density
0.79
Flash Point
13 °C (55.4 °F)
Flammable (Explosive) Limits
Not applicable.
Ignition Temperature
425 °C (797 °F)
10. Stability and Reactivity
Reactivity
Highly flammable liquid and vapour.
Chemical stability
Stable under normal conditions.
Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
Conditions to avoid
Avoid contact with hot surfaces. Heat. No flames, no sparks. Eliminate all sources of ignition.
Incompatible materials
No additional information available
11. Toxicological Information
Acute effects
LD/LC50 values that are relevant for classification:
64-17-5 Ethyl alcohol
Oral LD50 7,060 mg/kg (rat)
Inhalative LC50/4 h 20,000 mg/l (rat)
Eye contact
No irritating effect.
Skin contact
Irritant to skin and mucous membranes.
Ingestion
No sensitizing effects known.
Inhalation
No sensitizing effects known.
Toxicity and irritation
The product shows the following dangers according to internally approved calculation methods for preparations:
Harmful
Irritant
Interactive effects No interactive effects between components are known.
12. Ecological Information
Ecotoxicity
No further relevant information available
Persistence and degradability
No further relevant information available
Bioaccumulative potential
No further relevant information available
Other adverse effects
General notes:
Water hazard class 1 (Self-assessment): slightly hazardous for water
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
13. Disposal Considerations
General information
Waste treatment methods
Recommendation:
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Uncleaned packagings:
Recommendation: Disposal must be made according to official regulations.
Recommended cleansing agent: Water, if necessary with cleansing agents.
14. Transport Information
ADG label required
HAZCHEM
No further relevant information available.
UN Number
UN1133
Proper shipping name
DOT Adhesives
ADR 1133 ADHESIVES
IMDG, IATA ADHESIVES
Transport hazard class
DOT
Class 3 Flammable liquids
Label 3
ADR, IMDG, IATA
Class 3 Flammable liquids
Packing group
3
Environmental hazard
Not applicable
Special precautions for users
Not applicable
Additional information
Transport/Additional information:
DOT
Quantity limitations On passenger aircraft/rail: 5 L
On cargo aircraft only: 60 L
ADR
Excepted quantities (EQ) Code: E2
Maximum net quantity per inner packaging: 30 mL
Maximum net quantity per outer packaging: 500 mL
IMDG
Limited quantities (LQ) 5L
Excepted quantities (EQ) Code: E2
Maximum net quantity per inner packaging: 30 mL
Maximum net quantity per outer packaging: 500 mL
Special precautions for user Warning: Flammable liquids
Hazard identification number (Kemler code): 33
EMS Number: F-E,S-D
Stowage Category B
15. Regulatory Information
Poisons Schedule Number
No further relevant information available.
Other Information
Section 355 (extremely hazardous substances):
7647-01-0 hydrogen chloride
Section 313 (Specific toxic chemical listings):
67-63-0 propan-2-ol
67-56-1 Methyl Alcohol
7647-01-0 hydrogen chloride
TSCA (Toxic Substances Control Act):
All components have the value ACTIVE.
Hazardous Air Pollutants
67-56-1 Methyl Alcohol
7647-01-0 hydrogen chloride
Proposition 65
Chemicals known to cause cancer:
None of the ingredients is listed.
Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed.
Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed.
Chemicals known to cause developmental toxicity:
64-17-5 Ethyl alcohol
67-56-1 Methyl Alcohol
Carcinogenic categories
EPA (Environmental Protection Agency)
None of the ingredients is listed.
TLV (Threshold Limit Value)
64-17-5 Ethyl alcohol A3
67-63-0 propan-2-ol A4
7647-01-0 hydrogen chloride A4
NIOSH-Ca (National Institute for Occupational Safety and Health)
None of the ingredients is listed.
16. Other Information
SDS preparation date
17 February 2026
Comments
Abbreviations and acronyms:
ADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International
Carriage of Dangerous Goods by Road)
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
NFPA: National Fire Protection Association (USA)
HMIS: Hazardous Materials Identification System (USA)