SAFETY DATA SHEET

Amino-polystyrene Magnetic Particles

Version 1Last reviewed 5 October 2021Catalogue: QAM-10-10, QAM-15-10, QAM-20-10, QAM-30-10, QAM-40-10, QAM-60-10, QAM-80-10

1. Identification

Product Identifiers

Product Name: Amino-polystyrene Magnetic Particles
Other Names: Amino Magnetic Particles, 2.5%w/v, 1.0-1.4 um, 10 mL
Product Number(s): QAM-10-10, QAM-15-10, QAM-20-10, QAM-30-10, QAM-40-10, QAM-60-10, QAM-80-10
CAS Number: 026628-22-8

Recommended use of the chemical and restriction on use

Laboratory use.
This material is only for purpose of technical analysis and/or scientific research. The health, toxicological, & eco-toxicological hazards of this substance have not been fully investigated; therefore, this substance must be handled only by, or under close supervision of those qualified in the handling and use of potentially hazardous substances. Not for domestic or food/drug/cosmetic use.

Company Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

Emergency Contact Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

2. Hazards Identification

Classification of the substance or mixture

Not classified as hazardous according to Regulation (EC) 1272/2008 (CLP/GHS) or Directive 67/548/EEC as amended. Caution: This substance has not been fully tested (EC).

Label Elements

Signal Words: Warning
Hazard Statement(s): Not available.
Precautionary Statement(s): Not available.

Primary route(s) of entry

Not available.

Human Health

Inhalation: May be harmful if inhaled. May cause upper respiratory tract & mucous membrane irritation.
Ingestion: May be harmful if swallowed.
Eyes: May cause skin and eye irritation.
Skin: May cause skin and eye irritation.

Environment

May be harmful to the environment

3. Composition / Information on Ingredients

Name	CAS No.	Content (w/w)	Classification
Water	732-18-5	97.45%	Not hazardous
Polystyrene Beads	9003-53-6-	> 2.3%	Not hazardous
Iron Oxide (Fe2O3)	309-37-1	< 0.2%	H315 H319H335
Sodium Azide	26628-22-8	0.05%	Acute Tox. 2 H300 H310 H330;Aquatic Acute 1 H400;Aquatic Chronic 1 H410

4. First Aid Measures

Ingestion: Rinse mouth with water, but do not swallow mouthwash. Do not induce
vomiting. Give plenty of water to drink (ONLY IN CONSCIOUS PERSONS).
Refer for medical attention.
Inhalation: Immediate fresh air & rest. Keep under observation and if breathing becomes
difficult seek immediate medical attention. Resuscitate if breathing stops.
Skin Contact: Remove contaminated clothes. Rinse skin with plenty of water or shower. Refer
for medical attention.
Eye Contact: First rinse with plenty of water for at least 10 minutes (remove contact lenses if
easily possible), ensure lids remain open during flushing, and then seek
immediate medical attention.
Other Information: No further relevant information available.

5. Firefighting Measures

Suitable extinguishing equipment

Fire: Use foam extinguishers or water spray.
HAZCHEM: Not available.

Special protective equipment and precautions for fire fighters

May produce black acrid smoke if burned.
Forms combustible solid if allowed drying out. Emits corrosive & toxic fumes,
including oxides of carbon, & nitrogen during combustion. Wear self contained breathing apparatus with full face shield operated in positive
pressure mode, MSHA/NIOSH (approved or equivalent), and full protective
gear.

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures: Use protective equipment as detailed in section 8.
Environmental precautions: Do not wash away into sewers.
Methods and materials for containment and clean up: Clean up spills using an absorbent, non-combustible material and gather up
placing in a clean closed container for disposal.

7. Handling and Storage

Precautions for safe handling: Read the Suppliers' technical data Sheet carefully before commissioning or using the product.
Conditions for safe storage: Store unopened package at ambient temperature in a well ventilated place away from heat

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls: No components above the 0.1% threshold have specific workplace control parameters assigned to ourknowledge.
Local mechanical ventilation not required as supplied, but this is also dependent on other mobile phases and analytes used. Always use a fume cupboard if handling as the dry power or where the liquid component may become airborne.

Personal protective equipment

Eye and face protection: Safety glasses with side-shields conforming to EN 166.
Skin protection: Suitable impervious gloves e.g. Nitrile or Neoprene rubber. The selected protective
gloves have to conform to EN 374.
Body protection: Avoid contact of contents with skin, eyes, and clothing. Wash hand before breaks
and immediately after handling the product.
Respiratory protection: If required to control exposure, use only suitable respirators and components
tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

9. Physical and Chemical Properties

General information

Appearance: Dilute suspension of Amino Magnetic Particles in deionised water with 0.05% Sodium Azide as preservative.
Color: Brownish
Odour: Not available.
pH: Not available.
Vapour Pressure: Not available.
Density: Not available.
Boiling Point: 100°C / 212°F.
Melting Point: Not available.
Solubility: Not available.
Specific Gravity of Density: Not available.
Flash Point: Not applicable.
Flammable (Explosive) Limits: Not applicable.
Ignition Temperature: Not applicable.
Formula: Not available.

10. Stability and Reactivity

Reactivity: Stable.
Chemical stability: Hazardous Polymerization: Will not occur.
Possibility of hazardous reactions: Monomer maybe formed if heated to high temperatures. May release
toxic fumes including oxides of carbon and nitrogen.
Conditions to avoid: Extreme heat.
Incompatible materials: Strong oxidising agents, bases.

11. Toxicological Information

Acute effects: No further relevant information available.
Eye contact: May cause eye irritation.
Skin contact: May be harmful if absorbed through skin.
Ingestion: May be harmful if swallowed.
Inhalation: May be harmful if inhaled.
Toxicity and irritation: No further relevant information available.

12. Ecological Information

Ecotoxicity: To the best of our knowledge, the ecotoxicological properties of this mixture have not been fully
investigated. However, the liquid may be harmful to the environment depending on the quantity and
dilution involved.
Persistence and degradability: No further relevant information available.
Bioaccumulative potential: No further relevant information available.
Other adverse effects: No further relevant information available.

13. Disposal Considerations

General information

Methods of disposal must meet all local, state and national laws.

14. Transport Information

ADG label required

HAZCHEM: Not available.
UN Number: None.
Proper shipping name: Not regulated.
Transport hazard class: 0
Packing group: None.
Environmental hazard: No information available.
Special precautions for users: No information available.
Additional information: No information available.

15. Regulatory Information

Poisons Schedule Number: Not listed.
Other Information: No further relevant information available.

16. Other Information

SDS preparation date: 5 October 2021
Comments: This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.