SAFETY DATA SHEET
Apiezon® AP201 Vacuum Oil
Version 1Last reviewed 17 February 2026Catalogue: AP201, M1-AP201-004, M1-AP201-020, M1-AP201-200
1. Identification
Product Identifiers
- Product Name
- Apiezon AP201 Vacuum Oil
- Other Names
- Apiezon®AP201 Vapour Booster Pump Fluid
- Product Number(s)
- AP201, M1-AP201-004, M1-AP201-020, M1-AP201-200
- CAS Number
- Not available
Recommended use of the chemical and restriction on use
Laboratory use. Oil for diffusion-ejector (booster) pumps
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
2. Hazards Identification
Classification of the substance or mixture
This product is not classified as hazardous, and this document has been compiled for information purposes.
Label Elements
- Signal Words
- Danger
- Hazard Statement(s)
- Not classified
- Precautionary Statement(s)
- Not classified
Primary route(s) of entry
Not available
Human Health
- Inhalation
- Not available
- Ingestion
- Not available
- Eyes
- not available
- Skin
- Not available
Environment
Not available
3. Composition / Information on Ingredients
| Name | CAS No. | Content (w/w) | Classification |
|---|
| Distillates (petroleum) | 64742-52-5 | >95% | Not Available |
| Hydrotreated heavy naphthenic performance enhancing additives | Proprietary | <5% | Not Available |
4. First Aid Measures
- Ingestion
- Do not induce vomiting, obtain medical attention.
- Inhalation
- None envisaged due to the low vapour pressure of the substance.
- Skin Contact
- Wash with soap and water.
- Eye Contact
- Not available
- Other Information
- No adverse effects expected. No special treatment required
5. Firefighting Measures
Suitable extinguishing equipment
- Fire
- Carbon dioxide, dry powder, foam or water fog. Do not use water jets.
- HAZCHEM
- None
Special protective equipment and precautions for fire fighters
Self-contained breathing apparatus may be required.
6. Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Split product constitutes a slip hazard. Avoid contact with skin and eyes.
- Environmental precautions
- Prevent entry into drains, sewers and watercourses.
- Methods and materials for containment and clean up
- Soak up spilt material with absorbent granules for disposal.
7. Handling and Storage
- Precautions for safe handling
- Avoid eye and prolonged skin contact.
- Conditions for safe storage
- No special precautions required.
8. Exposure Controls / Personal Protection
Exposure Standards
| Material | TWA ppm | TWA mg/m³ | STEL ppm | STEL mg/m³ |
|---|
| Oil mist, mineral | 5mg/m3 | - | - | |
- Engineering controls
- Not available
Personal protective equipment
- Eye and face protection
- Eye washes should be available for emergency use. If splashes are likely to occur wear safety glasses.
- Skin protection
- Wash hands after use. For prolonged or repeated skin contact gloves are recommended.
- Body protection
- Wear coveralls
- Respiratory protection
- None required
9. Physical and Chemical Properties
General information
- Appearance
- Pale amber liquid
- Odour
- Characteristic oily
- pH
- Not applicable
- Vapour Pressure
- 4 x 10-6 Torr at 20°C.
- Density
- 0.899 at 20°C.
- Boiling Point
- >250°C
- Melting Point
- Data not available
- Solubility
- Insoluble
- Specific Gravity of Density
- Data not available
- Flash Point
- 196°C (closed cup).
- Flammable (Explosive) Limits
- Data not available
- Ignition Temperature
- >320°C.
- Formula
- Data not available.
10. Stability and Reactivity
- Reactivity
- Stable under normal conditions of use
- Chemical stability
- Stable under normal conditions of use.
- Possibility of hazardous reactions
- Data not available
- Conditions to avoid
- Temperatures >180°C.
- Incompatible materials
- Strong oxidising agents.
11. Toxicological Information
- Acute effects
- Not available
- Eye contact
- May cause transient irritation
- Skin contact
- Not expected to be a skin sensitiser.
- Ingestion
- Not considered an aspiration hazard. Low toxicity: LD50 >2000mg/kg
- Inhalation
- Low volatility makes inhalation unlikely
- Toxicity and irritation
- Not considered a mutagenic hazard or carcinogen.
12. Ecological Information
- Ecotoxicity
- Expected to be practically non-toxic.
- Persistence and degradability
- Inherently biodegradable.
- Bioaccumulative potential
- Has the potential to bioaccumulate.
- Other adverse effects
- No other adverse effects envisaged.
13. Disposal Considerations
General information
Product and packaging must be disposed of in accordance with local and national regulations. May be incinerated.
14. Transport Information
ADG label required
- HAZCHEM
- None
- UN Number
- Not relevant
- Proper shipping name
- Not relevant
- Transport hazard class
- Not relevant.
- Packing group
- Not relevant.
- Environmental hazard
- Not relevant.
- Special precautions for users
- Not relevant
- Additional information
- Not available.
15. Regulatory Information
- Poisons Schedule Number
- Product is not subject to Authorisation under REACH.
- Other Information
- A chemical safety assessment has been performed for the substance.
16. Other Information
- SDS preparation date
- 17 February 2026