Inform respective authorities in case of seepage into water course or sewage system.
Do not allow to enter sewers/ surface or ground water.
Methods and materials for containment and clean up
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Use neutralising agent.
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
Do not flush with water or aqueous cleansing agents
7. Handling and Storage
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols. Keep ignition sources away - Do not smoke.
Protect from heat.
Protect against electrostatic charges.
Keep respiratory protective device available.
Conditions for safe storage
Keep container tightly sealed.
Protect from heat and direct sunlight.
8. Exposure Controls / Personal Protection
Exposure Standards
Engineering controls
No information available.
Personal protective equipment
Eye and face protection
Keep away from foodstuffs, beverages and feed.
Avoid contact with the eyes and skin.
Wear tightly sealed goggles
Skin protection
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.
Wear protective gloves
Body protection
Immediately remove all soiled and contaminated clothing.
Respiratory protection
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use
self-contained respiratory protective device.
9. Physical and Chemical Properties
General information
Appearance
Light yellow liquid
Odour
Amine-like
pH
Not determined.
Vapour Pressure
2.8 hPa at 20 °C
Density
Not available.
Boiling Point
176 °C
Melting Point
-75 °C
Solubility
Not miscible or difficult to mix.
Specific Gravity of Density
0.915 g/cm³ at 20 °C
Flash Point
54 °C
Flammable (Explosive) Limits
Product is not explosive. However, formation of explosive air/vapour
mixtures are possible.
Ignition Temperature
Not determined.
Formula
Not available.
10. Stability and Reactivity
Reactivity
No further relevant information available.
Chemical stability
No further relevant information available.
Possibility of hazardous reactions
No dangerous reactions known.
Conditions to avoid
No further relevant information available.
Incompatible materials
No further relevant information available.
11. Toxicological Information
Acute effects
Oral LD50 265 mg/kg (rat)
Dermal LD50 1660 mg/kg (rabbit)
Inhalative LC50/4 h 2.06 mg/l (rat)
Eye contact
Strong caustic effect.
Skin contact
Strong caustic effect on skin and mucous membranes.
Ingestion
Swallowing will lead to a strong caustic effect on mouth and throat and to the danger of perforation of esophagus and stomach.
Inhalation
No further relevant information available.
Toxicity and irritation
No further relevant information available.
12. Ecological Information
Ecotoxicity
Harmful to fish
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
No further relevant information available.
Other adverse effects
Water hazard class 2 (German Regulation) (Assessment by list): hazardous for water
Do not allow product to reach ground water, water course or sewage system.
Must not reach sewage water or drainage ditch undiluted or unneutralised.
Danger to drinking water if even small quantities leak into the ground.
Harmful to aquatic organisms
13. Disposal Considerations
General information
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Disposal must be made according to official regulations
14. Transport Information
ADG label required
Class 3 Flammable liquidClass 8 Corrosive
HAZCHEM
Not available.
UN Number
UN2619
Proper shipping name
2619 BENZYLDIMETHYLAMINE
Transport hazard class
8 Corrosive substances
Packing group
PG II
Environmental hazard
No
Special precautions for users
Warning: Corrosive substances.
Additional information
Danger code (Kemler): 83
EMS Number: F-E,S-C
ADR
Limited quantities (LQ) 1L
Excepted quantities (EQ) Code: E2
Maximum net quantity per inner packaging: 30 mL
Maximum net quantity per outer packaging: 500 mL
Transport category 2
Tunnel restriction code D/E
IMDG
Limited quantities (LQ) 1L
Excepted quantities (EQ) Code: E2
Maximum net quantity per inner packaging: 30 mL
Maximum net quantity per outer packaging: 500 ml
15. Regulatory Information
Poisons Schedule Number
No information available.
Other Information
No further relevant information available.
16. Other Information
SDS preparation date
18 February 2026
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
References
Electron Microscopy Science SDS (BDMA) N-Benzyldimethylamine https://www.emsdiasum.com/docs/technical/msds/11400.pdf Date of issue 17/01/2025