SAFETY DATA SHEET
CCC Thinner
Version 1 Last reviewed 29 March 2022 Catalogue: EMS12665; 12665
1. Identification
Product Identifiers
Product Name CCC Thinner
Other Names AB LEIT - CCC Thinner
Product Number(s) EMS12665; 12665
Recommended use of the chemical and restriction on use
Laboratory use
Company Details
ProSciTech Pty Ltd 11 Carlton Street KIRWAN QLD 4817 Australia (07) 4773 9444 pst@proscitech.com proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd 11 Carlton Street KIRWAN QLD 4817 Australia (07) 4773 9444 pst@proscitech.com proscitech.com.au
2. Hazards Identification
Classification of the substance or mixture
Mixture
Label Elements
Flammable Harmful / irritant
Signal Words None
Hazard Statement(s) H225: Highly flammable liquid and vapour H319: Causes serious eye irritation H336: May cause drowsiness or dizzeness
Precautionary Statement(s) Keep away from heat/sparks/open flames/hot surfaces. - No smoking Ground/bond container and receiving equipment Use explosion-proof electrical/ventilating/lighting/equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Avoid breathing dust/fume/gas/mist/vapours/spray Wash thoroughly after handling. Use only outdoors or in a well-ventilated area. Wear protective gloves/protective clothing/eye protection/face protection. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a poison center/doctor if you feel unwell. If eye irritation persists: Get medical advice/attention. In case of fire: Use for extinction: CO₂, powder or water spray. Store in a well-ventilated place. Keep container tightly closed. Store in a well-ventilated place. Keep cool. Store locked up. Dispose of contents/container in accordance with local/regional/national/international regulations.
Primary route(s) of entry
Inhalation and skin contact - Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.
Human Health
Inhalation Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist. In case of unconsciousness place patient stably in side position for transportation.
Ingestion If symptoms persist consult doctor.
Eyes Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Skin Immediately wash with water and soap and rinse thoroughly.
Environment
No further relevant information available
3. Composition / Information on Ingredients
Name CAS No. Content (w/w) Classification n-butyl acetate 123-86-4 >25-≤50% Not Available 2-methoxy-1-methylethyl acetate 108-65-6 >25-≤50% Not Available Acetone, Reagent Grade 67-64-1 >10-≤25% Not Available xylene 1330-20-7 >2.5-≤10% Not Available
4. First Aid Measures
Ingestion If symptoms persist consult doctor.
Inhalation Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist. In case of unconsciousness place patient stably in side position for transportation.
Skin Contact Immediately wash with water and soap and rinse thoroughly.
Eye Contact Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Other Information Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident
5. Firefighting Measures
Suitable extinguishing equipment
Fire CO₂, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam
HAZCHEM No further relevant information available.
Special protective equipment and precautions for fire fighters
Mouth respiratory protective device.
6. Accidental Release Measures
Personal precautions, protective equipment and emergency procedures Wear protective equipment. Keep unprotected persons away. See Section 7 for information on safe handling. See Section 8 for information on personal protection equipment. See Section 13 for disposal information.
Environmental precautions Dilute with plenty of water. Do not allow to enter sewers/ surface or ground water
Methods and materials for containment and clean up Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Dispose contaminated material as waste according to item 13. Ensure adequate ventilation.
7. Handling and Storage
Precautions for safe handling Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols.
Conditions for safe storage Store in a cool location. Keep receptacle tightly sealed. Store in cool, dry conditions in well sealed receptacles. Protect from heat and direct sunlight.
8. Exposure Controls / Personal Protection
Exposure Standards
Material TWA ppm TWA mg/m³ STEL ppm STEL mg/m³ n-butyl acetate 150 ppm 712 mg/m³ 200 ppm 950 mg/m³ 2-methoxy-1-methylethyl acetate 50 ppm - - Acetone, Reagent Grade 500 ppm 1187 mg/m³ 250 ppm 590 mg/m³ xylene 150 ppm 651 mg/m³ 100 ppm 435 mg/m³
Engineering controls Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing. Wash hands before breaks and at the end of work. Avoid contact with the eyes and skin.
Personal protective equipment
Eye and face protection Tightly sealed goggles
Skin protection Protective gloves - The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Body protection Protective gloves - The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Respiratory protection In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air.
9. Physical and Chemical Properties
General information
Appearance Clear liquid
Odour Pungent
pH Not determined.
Vapour Pressure Not determined.
Density Not determined.
Boiling Point 55 °C (131 °F)
Melting Point Undetermined
Solubility Fully miscible.
Specific Gravity of Density 0.88568 g/cm³ (7.391 lbs/gal)
Flash Point -19 °C (-2.2 °F)
Flammable (Explosive) Limits Not flammable, Product is not selfigniting Product is not explosive. However, formation of explosive air/vapour mixtures are possible.
Ignition Temperature 315 °C (599 °F)
Formula Organic solvents: 100.0 % VOC content: 80.77 % 912.0 g/l / 7.61 lb/gal Solids content: 0.0 % Other information No further relevant information available.
10. Stability and Reactivity
Reactivity No further relevant information available.
Possibility of hazardous reactions No dangerous reactions known.
Conditions to avoid No further relevant information available.
Incompatible materials No further relevant information available.
11. Toxicological Information
Acute effects Harmful; Irritant
Eye contact Irritating effect.
Skin contact Irritant to skin and mucous membranes
Ingestion No further relevant information available.
Inhalation No further relevant information available.
Toxicity and irritation IARC (International Agency for Research on Cancer) 1330-20-7 xylene 3
12. Ecological Information
Ecotoxicity No further relevant information available
Persistence and degradability No further relevant information available
Bioaccumulative potential No further relevant information available
Other adverse effects Water hazard class 1 (Self-assessment): slightly hazardous for water Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system
13. Disposal Considerations
General information
Must not be disposed of together with household garbage. Do not allow product to reach sewage system. Disposal must be made according to official regulations. Water, if necessary with cleansing agents.
14. Transport Information
ADG label required
Class 3 Flammable liquid
HAZCHEM No further relevant information available.
UN Number UN1993
Proper shipping name FLAMMABLE LIQUID, N.O.S. (ACETONE, BUTYL ACETATES)
Transport hazard class 3 Flammable liquids
Packing group II
Environmental hazard Not applicable.
Special precautions for users Warning: Flammable liquids Hazard identification number (Kemler code): 33 EMS Number: F-E,S-E Stowage Category B
Additional information Quantity limitations On passenger aircraft/rail: 5 L On cargo aircraft only: 60 L Excepted quantities (EQ) Code: E2 Maximum net quantity per inner packaging: 30 mL Maximum net quantity per outer packaging: 500 mL Limited quantities (LQ) 1L Excepted quantities (EQ) Code: E2 Maximum net quantity per inner packaging: 30 mL Maximum net quantity per outer packaging: 500 mL UN "Model Regulation": UN 1993 FLAMMABLE LIQUID, N.O.S. (ACETONE, BUTYL ACETATES), 3, II
15. Regulatory Information
Other Information Section 355 (extremely hazardous substances): None of the ingredients is listed. Section 313 (Specific toxic chemical listings): 1330-20-7 xylene TSCA (Toxic Substances Control Act): All components have the value ACTIVE. Hazardous Air Pollutants: 1330-20-7 xylene Proposition 65 Chemicals known to cause cancer: None of the ingredients is listed. Chemicals known to cause reproductive toxicity for females: None of the ingredients is listed. Chemicals known to cause reproductive toxicity for males: None of the ingredients is listed. Chemicals known to cause developmental toxicity: None of the ingredients is listed. EPA (Environmental Protection Agency) 67-64-1 Acetone, Reagent Grade I 1330-20-7 xylene I TLV (Threshold Limit Value established by ACGIH) 67-64-1 Acetone, Reagent Grade A4 1330-20-7 xylene A4
16. Other Information
SDS preparation date 29 March 2022
Comments This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.
This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.
... End of SDS ...