SAFETY DATA SHEET

Citifluor AF300 Antifadent Solution

Version 1Last reviewed 23 January 2023Catalogue: 17977-25, EMS17977-25

1. Identification

Product Identifiers

Product Name: Citifluor AF300 Antifadent Solution
Other Names: Not available
Product Number(s): 17977-25, EMS17977-25
CAS Number: Not available.

Recommended use of the chemical and restriction on use

Laboratory chemicals

Company Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

Emergency Contact Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

2. Hazards Identification

Classification of the substance or mixture

GHS05 Corrosion
Skin Corrosion 1B H314 Causes severe skin burns and eye damage.
Eye Damage 1 H318 Causes serious eye damage.

Label Elements

Signal Words: None
Hazard Statement(s): Hazard-determining components of labelling:
triethylenediamine
Causes severe skin burns and eye damage.
Precautionary Statement(s): Do not breathe dusts or mists.
Wash thoroughly after handling.
Wear protective gloves/eye protection/face protection.

Human Health

Inhalation: Remove person to fresh air and keep comfortable for breathing.
Ingestion: Rinse mouth. Do NOT induce vomiting.
Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Skin: (or hair) Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse.

Environment

Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.

3. Composition / Information on Ingredients

Name	CAS No.	Content (w/w)	Classification
glycerol	56-81-5	>50-≤100%	Mixtures
triethylenediamine	280-57-9	>2.5-≤10%	Mixtures

4. First Aid Measures

Ingestion: Drink copious amounts of water and provide fresh air. Immediately call a doctor.
Inhalation: In case of unconsciousness place patient stably in side position for transportation.
Skin Contact: Immediately wash with water and soap and rinse thoroughly. Immediately remove any clothing soiled by the product.
Eye Contact: Rinse opened eye for several minutes under running water. Then consult a doctor.
Other Information: No further relevant information available.

5. Firefighting Measures

Suitable extinguishing equipment

Fire: Use fire fighting measures that suit the environment.
HAZCHEM: No further relevant information available.

Special protective equipment and precautions for fire fighters

No special measures required.

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures: Wear protective equipment. Keep unprotected persons away.
Environmental precautions: Dilute with plenty of water. Do not allow to enter sewers/surface or ground water.
Methods and materials for containment and clean up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Use neutralizing agent.
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.

7. Handling and Storage

Precautions for safe handling: Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols.
Keep ignition sources away - Do not smoke.
Conditions for safe storage: Keep receptacle tightly sealed.

8. Exposure Controls / Personal Protection

Exposure Standards

Material	TWA ppm	TWA mg/m³	STEL ppm	STEL mg/m³
glycerol	-	-	-

Engineering controls: Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.

Personal protective equipment

Eye and face protection: Tightly sealed goggles.
Skin protection: Wear protective gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Body protection: Not available.
Respiratory protection: In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air.

9. Physical and Chemical Properties

General information

Appearance: Clear liquid
Odour: Unpleasant
pH: Not determined.
Vapour Pressure: 0.2hPa
Density: 1.248g/cm³
Boiling Point: >100°C
Melting Point: Undetermined
Solubility: Fully miscible
Specific Gravity of Density: Not available
Flash Point: 160°C
Flammable (Explosive) Limits: Not determined
Ignition Temperature: Product is not selfigniting
Formula: Not available.

10. Stability and Reactivity

Reactivity: No further relevant information available.
Chemical stability: No decomposition if used according to specifications.
Possibility of hazardous reactions: No dangerous reactions known.
Conditions to avoid: No further relevant information available.
Incompatible materials: No further relevant information available.

11. Toxicological Information

Acute effects: Not available.
Eye contact: Strong caustic effect.
Skin contact: Caustic effect on skin and mucous membranes.
Ingestion: Swallowing will lead to a strong caustic effect on mouth and throat and to the danger of perforation of oesophagus and stomach
Inhalation: Not available.
Toxicity and irritation: Corrosive

12. Ecological Information

Ecotoxicity: No further relevant information available.
Persistence and degradability: No further relevant information available.
Bioaccumulative potential: No further relevant information available.
Other adverse effects: Water hazard class 1: slightly hazardous for water.
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Must not reach bodies of water or drainage ditch undiluted or unneutralized.

13. Disposal Considerations

General information

Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Disposal must be made according to official regulations.
Recommended cleansing agent: Water, if necessary with cleansing agents.

14. Transport Information

ADG label required

HAZCHEM: No further relevant information available.
UN Number: Void
Proper shipping name: Void
Transport hazard class: Void
Packing group: Void
Environmental hazard: Not applicable.
Special precautions for users: Not applicable.
Additional information: Not available.

15. Regulatory Information

Poisons Schedule Number: None of the items is listed.
Other Information: A Chemical Safety Assessment has not been carried out.

16. Other Information

SDS preparation date: 23 January 2023
Comments: This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.