Crystalbond 509, Temporary Adhesive

1. Identification

Product Identifiers

Product Name

Crystalbond 509

Other Names

Crystalbond 509

Product Number(s)

I509

CAS Number

Not available

Recommended use of the chemical and restriction on use

Company Details

Emergency Contact Details

2. Hazards Identification

Classification of the substance or mixture

Label Elements

Signal Words

None

Hazard Statement(s)

• H315 Causes skin irritation
• H317 May cause an allergic skin reaction
• H318 Causes serious eye damage
• H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled
• H335 May cause respiratory irritation

Precautionary Statement(s)

• P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
• P264: Wash thoroughly after handling
• P271: Use ony outdoors or in a well-ventilated area
• P272: Contaminated work clothing should not be allowed out of the workplace.
• P280 Wear protective gloves/protective clothing/eye protection/face protection.
• P303±P361±P353: If on skin (or hair) Take off immediately all contaminated clothing. Rinse skin with water/shower
• P304±P340: If Inhaled. remove person to fresh air and keep comfortable for breathing
• P305±P351±P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P321: Specific treatment (see this label)
• P363: Wash contaminated clothing before reuse
• P311: Call a poison centre or doctor
• P313±P333: If skin irritation or rash ocurs, get medical advice
• P342±P311 If experiencing respiratory symptoms: Call a POISON CENTER/doctor.
• P361: Remove/Take off immediately all contaminated clothing
• P404 ± P233: Store in a well-ventilated place. Keep container tightly closed
• P405 Store locked up.
• P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Primary route(s) of entry

Human Health

Inhalation

May cause respiratory irritation

Ingestion

Not available.

Eyes

Causes serious eye damage

Skin

May cause an allergic skin reaction

Environment

3. Composition / Information on Ingredients

4. First Aid Measures

Ingestion

If symptoms persist consult doctor

Inhalation

• Supply fresh air and to be sure call for a doctor.
• In case of unconsciousness place patient stably in side position for transportation

Skin Contact

Immediately wash with water and soap and rinse thoroughly

Eye Contact

Rinse opened eye for several minutes under running water. Then consult a doctor

Other Information

Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.

5. Firefighting Measures

Suitable extinguishing equipment

Fire

Use fire extinguishing methods suitable to surrounding conditions

Large Fire

Use fire extinguishing methods suitable to surrounding conditions.

HAZCHEM

Not available

Special protective equipment and precautions for fire fighters

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures

No further relevant information available

Environmental precautions

Do not allow to enter sewers/ surface or ground water

Methods and materials for containment and clean up

• Dispose contaminated material as waste according to Section 13
• Ensure adequate ventilation

7. Handling and Storage

Precautions for safe handling

• Ensure good ventilation/exhaustion at the workplace
• Prevent formation of dust

Conditions for safe storage

Keep container tightly sealed

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls

• Keep away from foodstuffs, beverages and feed.
• Immediately remove all soiled and contaminated clothing.
• Wash hands before breaks and at the end of work.
• Avoid contact with the skin.
• Avoid contact with the eyes and skin

Personal protective equipment

Eye and face protection

Tightly sealed goggles

Skin protection

Protective gloves - The material needs to be impermeable and resistant to the product/the substance/the preperation

Body protection

No information available.

Respiratory protection

Incase of breif exposure or low pollution use respiratory filter device. Incase of intensive or longer exposure use respiratory protective device that is independant of circulating air

9. Physical and Chemical Properties

General information

Appearance

Solid amber coloured

Odour

Odourless

pH

Not available

Vapour Pressure

0.1 hPa at 20°C

Density

1.31 g/cm³ (10.93195 lbs/gal)

Boiling Point

>100 °C (>212 °F)

Melting Point

68.3°C

Solubility

Insoluble

Specific Gravity of Density

Not available

Flash Point

>263 °C (>505.4 °F)

Flammable (Explosive) Limits

• Lower: 1.7 Vol %
• Upper: 53.0 Vol %
• Product does not present an explosion hazard

Ignition Temperature

410 °C (770 °F)

Formula

Not available.

10. Stability and Reactivity

Reactivity

No further relevant information available

Chemical stability

Stable under normal conditions of use

Possibility of hazardous reactions

No dangerous reactions known

Conditions to avoid

No decomposition if used according to specifications

Incompatible materials

No further relevant information available

11. Toxicological Information

Acute effects

• 85-44-9 phthalic anhydride
• Oral LD50 4,200 mg/kg (rat)
• 107-21-1 ethanediol
• Oral LD50 5,840 mg/kg (rat)
• Dermal LD50 9,530 mg/kg (rabbit)

Eye contact

Strong irritant with the danger of severe eye injury

Skin contact

• Irritant to skin and mucous membranes.
• Sensitisation possible through skin and eye contact

Ingestion

No further relevant information available

Inhalation

No sensitizing effects known.

Toxicity and irritation

Harmful and Irritant

12. Ecological Information

Ecotoxicity

• Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water
• Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system

Persistence and degradability

No further relevant information available

Bioaccumulative potential

No further relevant information available

Other adverse effects

No further relevant information available

13. Disposal Considerations

General information

14. Transport Information

ADG label required

HAZCHEM

Not available

UN Number

Not applicable

Proper shipping name

Not applicable

Transport hazard class

Not applicable

Packing group

Not applicable

Environmental hazard

Not applicable

Special precautions for users

Not applicable

Additional information

• Transport: DOT Quantity limitations: On passenger aircraft/ril: 25kg
• On cargo aircraft only: 100kg
• IMDG· Limited quantities (LQ) 5 kg
• Excepted quantities (EQ) Code: E1
• Maximum net quantity per inner packaging: 30 g
• Maximum net quantity per outer packaging: 1000 g

15. Regulatory Information

Poisons Schedule Number

No information available

Other Information

• TLV: All components have the value A4
• PEL: Permissible Exposure Limit
• REL: Recommended Exposure Limit
• Skin Irrit. 2: Skin corrosion/irritation - Category 2
• Eye Irrit. 2B: Serious eye damage/eye irritation - Category 2B

16. Other Information

SDS preparation date

27 November 2024

Comments

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.