Crystalbond 590 Temporary Adhesive

1. Identification

Product Identifiers

Product Name

Crystalbond 590

Other Names

Crystalbond, temporary adhesive

Product Number(s)

50402-01, 50402-02, I590

CAS Number

Not available

Recommended use of the chemical and restriction on use

Company Details

Emergency Contact Details

2. Hazards Identification

Classification of the substance or mixture

Label Elements

Signal Words

None

Hazard Statement(s)

• H315 Causes skin irritation
• H318 Causes serious eye damage
• H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
• H317 May cause an allergic skin reaction.
• H335 May cause respiratory irritation.

Precautionary Statement(s)

• Avoid breathing dust/fume/gas/mist/vapours/spray
• Wash thoroughly after handling.
• Use only outdoors or in a well-ventilated area.
• Contaminated work clothing must not be allowed out of the workplace.
• Wear protective gloves / eye protection / face protection.
• [In case of inadequate ventilation] wear respiratory protection.
• If on skin: Wash with plenty of water.
• IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• Immediately call a poison center/doctor.
• Specific treatment (see on this label).
• Take off contaminated clothing and wash it before reuse.
• If skin irritation or rash occurs: Get medical advice/attention.
• If experiencing respiratory symptoms: Call a poison center/doctor.
• Wash contaminated clothing before reuse.
• Store in a well-ventilated place. Keep container tightly closed.
• Store locked up.
• Dispose of contents/container in accordance with local/regional/national/international regulations.

Primary route(s) of entry

Human Health

Inhalation

May cause respiratory irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled

Ingestion

Not available

Eyes

Causes serious eye damage

Skin

Causes skin irritation

Environment

3. Composition / Information on Ingredients

4. First Aid Measures

Ingestion

Immediately call a doctor.

Inhalation

• Supply fresh air and to be sure call for a doctor.
• In case of unconsciousness place patient stably in side position for transportation.

Skin Contact

Immediately wash with water and soap and rinse thoroughly.

Eye Contact

Rinse opened eye for several minutes under running water. Then consult a doctor

Other Information

Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.

5. Firefighting Measures

Suitable extinguishing equipment

Fire

Use fire fighting measures that suit the environment

HAZCHEM

No further relevant information available

Special protective equipment and precautions for fire fighters

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures

No further relevant information available

Environmental precautions

No special measures required

Methods and materials for containment and clean up

• Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
• Dispose contaminated material as waste according to item 13.
• Ensure adequate ventilation.

7. Handling and Storage

Precautions for safe handling

• Ensure good ventilation/exhaustion at the workplace.
• Prevent formation of aerosols

Conditions for safe storage

No special requirements

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls

• Keep away from foodstuffs, beverages and feed.
• Immediately remove all soiled and contaminated clothing.
• Wash hands before breaks and at the end of work.
• Avoid contact with the skin.
• Avoid contact with the eyes and skin.

Personal protective equipment

Eye and face protection

Avoid contact with the eyes

Skin protection

Avoid contact with the skin

Body protection

Wash hands before breaks and at the end of work. Immediately remove all soiled and contaminated clothing

Respiratory protection

No further relevant information available

9. Physical and Chemical Properties

General information

Appearance

Solid amber bar

Odour

Odorless

pH

Not determined

Vapour Pressure

0.1 hPa (0.1 mm Hg) at 20 °C (68 °F)

Density

Not determined

Boiling Point

>149 °C (>300.2 °F)

Melting Point

Undetermined

Solubility

Not miscible or difficult to mix

Specific Gravity of Density

Not determined

Flash Point

263 °C (505.4 °F)

Flammable (Explosive) Limits

• Not flammable
• Explosion limits:
• Lower: 1.7 Vol %
• Upper: 53 Vol %

Ignition Temperature

410 °C (770 °F)

Formula

No further relevant information available

10. Stability and Reactivity

Reactivity

No further relevant information available

Chemical stability

Stable under normal conditions

Possibility of hazardous reactions

No dangerous decomposition products known

Conditions to avoid

No further relevant information available

Incompatible materials

No further relevant information available

11. Toxicological Information

Acute effects

• 85-44-9 phthalic anhydride
• Oral LD50 4,200 mg/kg (rat)
• 107-21-1 ethanediol
• Oral LD50 5,840 mg/kg (rat)
• Dermal LD50 9,530 mg/kg (rabbit)

Eye contact

Strong irritant with the danger of severe eye injury

Skin contact

Irritant to skin and mucous membranes

Ingestion

No further relevant information available

Inhalation

No further relevant information available

Toxicity and irritation

• The product shows the following dangers according to internally approved calculation methods for preparations:
• Harmful
• Irritant

12. Ecological Information

Ecotoxicity

No further relevant information available

Persistence and degradability

No further relevant information available

Bioaccumulative potential

No further relevant information available

Other adverse effects

No further relevant information available

13. Disposal Considerations

General information

14. Transport Information

ADG label required

HAZCHEM

No further relevant information available

UN Number

UN1760

Proper shipping name

CORROSIVE LIQUID, N.O.S. (PHTHALIC ANHYDRIDE)

Transport hazard class

Class 8

Packing group

PG III

Environmental hazard

Not applicable

Special precautions for users

• Special precautions for user Warning: Corrosive substances
• Danger code (Kemler): 80
• EMS Number: F-A,S-B
• Segregation groups Acids
• Stowage Category A
• Stowage Code SW2 Clear of living quarters.

Additional information

• Quantity limitations On passenger aircraft/rail: 5 L
• On cargo aircraft only: 60 L
• Excepted quantities (EQ) Code: E1
• Maximum net quantity per inner packaging: 30 mL
• Maximum net quantity per outer packaging: 1000 mL
• Limited quantities (LQ) 5L
• Excepted quantities (EQ) Code: E1
• Maximum net quantity per inner packaging: 30 mL
• Maximum net quantity per outer packaging: 1000 mL

15. Regulatory Information

Poisons Schedule Number

• TLV (Threshold Limit Value established by ACGIH)
• 85-44-9 phthalic anhydride A4
• 107-21-1 ethanediol A4

16. Other Information

SDS preparation date

27 November 2024

Comments

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.