Depex Mounting Medium

1. Identification

Product Identifiers

Product Name

Depex Mounting Medium - DISCONTINUED

Other Names

Not available

Product Number(s)

13514, 13515, EMS13514, EMS13515

CAS Number

Not available

Recommended use of the chemical and restriction on use

Company Details

Emergency Contact Details

2. Hazards Identification

Classification of the substance or mixture

Label Elements

Signal Words

None

Hazard Statement(s)

• Hazard-determining components of labelling:
• xylene
• dibutyl phthalate
• Flammable liquid and vapour.
• in contact with water releases flammable gases which may ignite spontaneously.
• Toxic in contact with skin.
• Harmful if inhaled.
• Causes skin irritation.
• May damage fertility or the unborn child.

Precautionary Statement(s)

• Obtain special instructions before use.
• Do not handle until all safety precautions have been read and understood.
• Keep away from heat/sparks/open flames/hot surfaces. No smoking.
• Keep away from any possible contact with water, because of violent reaction and possible flash fire.
• Handle and store contents under inert gas. Protect from moisture.
• Keep container tightly closed.
• Ground/bond container and receiving equipment.
• Use explosion-proof electrical/ventilating/lighting equipment.
• Use only non-sparking tools.
• Take precautionary measures against static discharge.
• Avoid breathing dust/fume/gas/mist/vapours/spray.
• Wash thoroughly after handling.
• Use only outdoors or in a well-ventilated area.
• Wear protective gloves/protective clothing/eye protection/face protection.

Primary route(s) of entry

Human Health

Inhalation

Remove victim to fresh air and keep at rest in a position comfortable for breathing.

Ingestion

If exposed or concerned: Get medical advice/attention.

Eyes

Call a POISON CENTER/doctor if you feel unwell.

Skin

(or hair) Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. Take off immediately all contaminated clothing and wash it before reuse. If skin irritation occurs: Get medical advice/attention. Brush off loose particles from skin. Immerse in cool water/wrap in bandages.

Environment

3. Composition / Information on Ingredients

4. First Aid Measures

Ingestion

If symptoms persist consult doctor.

Inhalation

• Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist.
• In case of unconsciousness place patient stably in side position for transportation.

Skin Contact

Immediately wash with water and soap and rinse thoroughly.

Eye Contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Other Information

• Immediately remove any clothing soiled by the product.
• Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.
• In case of irregular breathing or respiratory arrest provide artificial respiration.

5. Firefighting Measures

Suitable extinguishing equipment

Fire

CO₂, sand, extinguishing powder. Do not use water.

HAZCHEM

For safety reasons unsuitable extinguishing agents: Water with full jet.

Special protective equipment and precautions for fire fighters

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures

Wear protective equipment. Keep unprotected persons away.

Environmental precautions

• Inform respective authorities in case of seepage into water course or sewage system.
• Do not allow to enter sewers/surface or ground water.

Methods and materials for containment and clean up

• Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
• Dispose contaminated material as waste according to item 13.
• Ensure adequate ventilation.
• Do not flush with water or aqueous cleansing agents.

7. Handling and Storage

Precautions for safe handling

• Ensure good ventilation/exhaustion at the workplace.
• Open and handle receptacle with care.
• Prevent formation of aerosols.
• Keep ignition sources away - Do not smoke.
• Protect from heat.
• Protect against electrostatic charges.
• Keep respiratory protective device available.

Conditions for safe storage

• Keep container tightly sealed.
• Store in cool, dry conditions in well sealed receptacles.
• Protect from heat and direct sunlight.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls

• Keep away from foodstuffs, beverages and feed.
• Immediately remove all soiled and contaminated clothing.
• Wash hands before breaks and at the end of work.
• Store protective clothing separately.
• Avoid contact with the skin.
• Avoid contact with the eyes and skin.

Personal protective equipment

Eye and face protection

Tightly sealed goggles.

Skin protection

Wear protective gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Body protection

Wear protective clothing.

Respiratory protection

In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.

9. Physical and Chemical Properties

General information

Appearance

Colourless liquid

Odour

Characteristic

pH

Not determined

Vapour Pressure

Not determined

Density

Not determined

Boiling Point

140°C

Melting Point

-50°C

Solubility

Not miscible or difficult to mix.

Specific Gravity of Density

Not available

Flash Point

26°C

Flammable (Explosive) Limits

• Lower: 0.1 Vol%
• Upper: 2 Vol%

Ignition Temperature

390°C

Formula

Not available.

10. Stability and Reactivity

Reactivity

No further relevant information available.

Chemical stability

No decomposition if used according to specifications.

Possibility of hazardous reactions

Contact with water releases flammable gases.

Conditions to avoid

No further relevant information available.

Incompatible materials

No further relevant information available.

11. Toxicological Information

Acute effects

• 84-74-2 dibutyl phthalate
• Oral LD50 8000 mg/kg (rat)
• Dermal LD50 20000 mg/kg (rabbit)

Eye contact

No irritating effect.

Skin contact

Irritant to skin and mucous membranes.

Ingestion

Not available

Inhalation

No sensitising effects known.

Toxicity and irritation

• Toxic
• Harmful
• Irritant

12. Ecological Information

Ecotoxicity

Toxic for fish.

Persistence and degradability

No further relevant information available.

Bioaccumulative potential

No further relevant information available.

Other adverse effects

• Water hazard class 2: hazardous for water.
• Do not allow product to reach ground water, water course or sewage system.
• Danger to drinking water if even small quantities leak into the ground.
• Also poisonous for fish and plankton in water bodies.
• Toxic for aquatic organisms.

13. Disposal Considerations

General information

14. Transport Information

ADG label required

HAZCHEM

For safety reasons unsuitable extinguishing agents: Water with full jet.

UN Number

UN1866

Proper shipping name

1866 RESIN SOLUTION

Transport hazard class

Class 3 Flammable liquids.

Packing group

II

Environmental hazard

Not applicable

Special precautions for users

• Warning: Flammable liquids
• Hazard identification number (Kemler code): 36
• EMS Number: F-E,S-E
• Stowage Category: A

Additional information

• Limited quantities (LQ) 5L
• Excepted quantities (EQ) Code: E1
• Maximum net quantity per inner packaging: 30mL
• Maximum net quantity per outer packaging: 1000mL
• Transport category: 3
• Tunnel restriction code: D/E

15. Regulatory Information

Poisons Schedule Number

84-74-2 dibutyl phthalate S10

Other Information

A Chemical Safety Assessment has not been carried out.

16. Other Information

SDS preparation date

22 February 2026

Comments

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.