ProSciTech Safety Data Sheets ProSciTech Pty Ltd · proscitech.com.au

SAFETY DATA SHEET

Durcupan ACM Epoxy - Component A

Version 1Last reviewed 28 November 2024Catalogue: EMS14041

1. Identification

Product Identifiers

Product Name
Durcupan ACM Epoxy - Component A
Other Names
Durcupan ACM epoxy
Product Number(s)
EMS14041
CAS Number
25068-38-6

Recommended use of the chemical and restriction on use

Laboratory use

Company Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

Emergency Contact Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

2. Hazards Identification

Classification of the substance or mixture

  • GHS07
  • Skin Irrit. 2 H315 Causes skin irritation
  • Eye Irrit. 2 H319 Causes serious eye irritation
  • Skin Sens. 1 H317 May cause an allergic skin reaction

Label Elements

Harmful / irritant
Harmful / irritant
Signal Words
Warning
Hazard Statement(s)
  • Causes skin irritation
  • Causes serious eye irritation
  • May cause an allergic skin reaction
Precautionary Statement(s)
  • Avoid breathing dust/fume/gas/mist/vapours/spray
  • Wear protective gloves/protective clothing/eye protection/face protection
  • Avoid release to the environment
  • Wash thoroughly after handling
  • Contaminated work clothing must not be allowed out of the workplace
  • If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do
  • Continue rinsing
  • Specific treatment (see on this label)
  • Take off contaminated clothing and wash before reuse
  • If skin irritation or rash occurs: Get medical advice/attention
  • If eye irritation persists: Get medical advice/attention
  • If on skin: Wash with plenty of water
  • Collect spillage
  • Store in a well-ventilated place. Keep cool
  • Store in a dry place. Store in a closed container
  • Dispose of contents/container in accordance with local/regional/national/international regulations

Primary route(s) of entry

No further relevant information is available

Human Health

Inhalation
No further relevant information is available
Ingestion
No further relevant information is available
Eyes
Causes serious eye irritation
Skin
Causes skin irritation

Environment

Do not allow to enter sewers/ surface or ground water

3. Composition / Information on Ingredients

NameCAS No.Content (w/w)Classification
bisphenol-A-(epichlorhydrin) epoxy resin25068-38-6-Not Available

4. First Aid Measures

Ingestion
If symptoms persist, consult doctor
Inhalation
Supply fresh air and to be sure, call for a doctor
Skin Contact
Immediately wash with water and soap and rinse thoroughly
Eye Contact
Rinse the opened eye for several minutes under running water. If symptoms persist, consult a doctor
Other Information
No further relevant information is available

5. Firefighting Measures

Suitable extinguishing equipment

Fire
Use fire fighting measures that suit the environment
HAZCHEM
No further relevant information is available

Special protective equipment and precautions for fire fighters

No further relevant information is available

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures
No further relevant information is available
Environmental precautions
: Do not allow water to enter sewers/surface or ground water
Methods and materials for containment and clean up
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Ensure adequate ventilation

7. Handling and Storage

Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols
Conditions for safe storage
Keep the receptacle tightly sealed

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls
  • Immediately remove all soiled and contaminated clothing.
  • Wash hands before breaks and at the end of work

Personal protective equipment

Eye and face protection
Tightly sealed goggles
Skin protection
Protective gloves.
Body protection
  • Protective gloves.
  • Tightly sealed goggles
Respiratory protection
In cases of brief exposure or low pollution, use a respiratory filter device. In case of intensive or longer exposure, use respiratory protective device that is independent of circulating air

9. Physical and Chemical Properties

General information

Appearance
Light Yellow
Odour
Undistinguishable
pH
Not determined
Vapour Pressure
Not determined
Density
Density at 20 °C (68 °F): 1.14 g/cm² (9.513 lbs/gal)
Boiling Point
Not determined
Melting Point
Not determined
Solubility
Not miscible or difficult to mix
Specific Gravity of Density
Not determined
Flash Point
Not determined
Flammable (Explosive) Limits
  • Not flammable
  • The product does not present an explosion hazard.
Ignition Temperature
Not determined
Formula
No further relevant information is available.

10. Stability and Reactivity

Reactivity
No further relevant information is available.
Chemical stability
No further relevant information is available.
Possibility of hazardous reactions
No dangerous decomposition products known
Conditions to avoid
No further relevant information is available.
Incompatible materials
No further relevant information is available.

11. Toxicological Information

Acute effects
No further relevant information is available.
Eye contact
Irritating effect
Skin contact
  • Irritant to skin and mucous membranes
  • Sensitization possible through skin contact
Ingestion
No further relevant information is available.
Inhalation
No further relevant information is available.
Toxicity and irritation
No further relevant information is available.

12. Ecological Information

Ecotoxicity
  • Water hazard class 2 (Assessment by list): hazardous for water
  • Do not allow product to reach ground water, water course or sewage system.
  • Danger to drinking water if even small quantities leak into the ground
Persistence and degradability
No further relevant information is available
Bioaccumulative potential
No further relevant information is available
Other adverse effects
No further relevant information is available

13. Disposal Considerations

General information

  • Must not be disposed of with household garbage. Do not allow the product to reach the sewage system.
  • Disposal must be made according to official regulations
  • Water hazard class 2 (Assessment by list): hazardous for water
  • Do not allow the product to reach groundwater, a watercourse, or the sewage system.
  • Danger to drinking water if even small quantities leak into the ground

14. Transport Information

ADG label required

Marine pollutant
Marine pollutant
Class 9 Miscellaneous
Class 9 Miscellaneous
HAZCHEM
No further relevant information is available
UN Number
UN3082
Proper shipping name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
Transport hazard class
Class 9
Packing group
III
Environmental hazard
Yes - Symbol (fish and tree)
Special precautions for users
  • Warning: Miscellaneous dangerous substances and articles
  • Danger code (Kemler): 90
  • EMS Number: F-A,S-F
Additional information
  • Transport/Additional information:
  • Excepted quantities (EQ) Code: E1
  • Maximum net quantity per inner package: 30 mL
  • Maximum net quantity per outer package: 1000 mL
  • Limited quantities (LQ): 5L
  • UN "Model Regulation": UN3082, Environmentally hazardous substances, liquid, n.o.s.
  • (reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight ≤ 700)), 9, III

15. Regulatory Information

Poisons Schedule Number
Substance is not listed
Other Information
  • Hazard statements
  • Causes skin irritation.
  • Causes serious eye irritation.
  • May cause an allergic skin reaction.
  • Precautionary statements
  • Avoid breathing dust/fume/gas/mist/vapours/spray
  • Wear protective gloves/protective clothing/eye protection/face protection.
  • Avoid release to the environment.
  • Wash thoroughly after handling.
  • Contaminated work clothing must not be allowed out of the workplace.
  • If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
  • Continue rinsing.
  • Specific treatment (see on this label).
  • Take off contaminated clothing and wash before reuse.
  • If skin irritation or rash occurs: Get medical advice/attention.
  • If eye irritation persists: Get medical advice/attention.
  • If on skin: Wash with plenty of water.
  • Collect spillage.
  • Store in a well-ventilated place. Keep cool.
  • Store in a dry place. Store in a closed container.
  • Dispose of contents/container in accordance with local/regional/national/international regulations.
  • Chemical safety assessment: A Chemical Safety Assessment has not been carried out.

16. Other Information

SDS preparation date
28 November 2024
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.