EMBED 812 RESIN (Procure 812 (DG))

1. Identification

Product Identifiers

Product Name

Procure 812

Other Names

EMBED 812 RESIN.

Product Number(s)

C045

CAS Number

25068-38-6

Recommended use of the chemical and restriction on use

Company Details

Emergency Contact Details

2. Hazards Identification

Classification of the substance or mixture

Label Elements

Signal Words

Warning

Hazard Statement(s)

• Causes skin irritation.
• Causes serious eye irritation.
• May cause an allergic skin reaction.

Precautionary Statement(s)

• Avoid breathing dust/fume/gas/mist/vapours/spray.
• Wear protective gloves / eye protection / face protection.
• Wash thoroughly after handling.
• Contaminated work clothing should not be allowed out of the workplace.

Primary route(s) of entry

Human Health

Inhalation

Not available.

Ingestion

Not available.

Eyes

• Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
• Continue rinsing.

Skin

• Wash contaminated clothing before reuse.
• If skin irritation or rash occurs: Get medical advice/attention
• Wash with plenty of water.
• Take off contaminated clothing and wash it before reuse.

Environment

3. Composition / Information on Ingredients

4. First Aid Measures

Ingestion

If symptoms persist consult doctor.

Inhalation

• Supply fresh air and to be sure call for a doctor.
• In case of unconsciousness place patient stably in side position for transportation.

Skin Contact

Immediately wash with water and soap and rinse thoroughly.

Eye Contact

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

Other Information

No further relevant information available.

5. Firefighting Measures

Suitable extinguishing equipment

Fire

Use fire extinguishing methods suitable to surrounding conditions.

HAZCHEM

Not available.

Special protective equipment and precautions for fire fighters

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures

Not required.

Environmental precautions

• Inform respective authorities in case of seepage into water course or sewage system.
• Do not allow to enter sewers/ surface or ground water.

Methods and materials for containment and clean up

• Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
• Ensure adequate ventilation.
• Protective Action Criteria for Chemicals
• PAC-1:
• 25068-38-6 reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight <= 700: 90 mg/m³
• PAC-2:
• 25068-38-6 reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight <= 700): 990 mg/m³
• PAC-3:
• 25068-38-6 reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight <= 700): 5,900 mg/m³

7. Handling and Storage

Precautions for safe handling

• Ensure good ventilation/exhaustion at the workplace.
• Prevent formation of aerosols.

Conditions for safe storage

• Requirements to be met by storerooms and receptacles: No special requirements.
• Information about storage in one common storage facility: Not required.
• Further information about storage conditions: Keep receptacle tightly sealed.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls

• Store in a well-ventilated place.
• Keep away from foodstuffs, beverages and feed.
• Immediately remove all soiled and contaminated clothing.
• Wash hands before breaks and at the end of work.
• Avoid contact with the eyes and skin.

Personal protective equipment

Eye and face protection

Tightly sealed goggles.

Skin protection

• Protective gloves.
• The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
• Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
• Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation ·
• Material of gloves
• The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. ·
• Penetration time of glove material
• The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observe.

Body protection

Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing Wash hands before breaks and at the end of work.

Respiratory protection

In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.

9. Physical and Chemical Properties

General information

Appearance

Light yellow liquid

Odour

Characteristic

pH

Not determined.

Vapour Pressure

at 20 °C: 23 hPa

Density

Not determined.

Boiling Point

100 °C (212 °F)

Melting Point

Undetermined

Solubility

Not miscible or difficult to mix with water.

Specific Gravity of Density

Not determined.

Flash Point

138 °C

Flammable (Explosive) Limits

Not determined.

Ignition Temperature

Product is not selfigniting.

Formula

Not available.

10. Stability and Reactivity

Reactivity

No further relevant information available.

Chemical stability

No decomposition if used according to specifications.

Possibility of hazardous reactions

No dangerous reactions known.

Conditions to avoid

No further relevant information available.

Incompatible materials

No further relevant information available.

11. Toxicological Information

Acute effects

No further relevant information available.

Eye contact

Irritating effect.

Skin contact

Irritant to skin and mucous membranes.

Ingestion

No further relevant information available.

Inhalation

Sensitisation possible through skin contact.

Toxicity and irritation

• The product shows the following dangers according to the calculation method of the General EU Classification
• Guidelines for Preparations as issued in the latest version: Irritant.
• arcinogenic categories
• IARC (International Agency for Research on Cancer): None of the ingredients is listed.
• NTP (National Toxicology Program): None of the ingredients is listed.
• OSHA-Ca (Occupational Safety Health Administration): None of the ingredients is listed.
• Alternative sources for toxicological information:
• No non-standard sources for toxicological information where used.

12. Ecological Information

Ecotoxicity

No further relevant information available.

Persistence and degradability

No further relevant information available.

Bioaccumulative potential

No further relevant information available.

Other adverse effects

• Water hazard class 2 (Self-assessment): hazardous for water.
• Do not allow product to reach ground water, water course or sewage system.
• Danger to drinking water if even small quantities leak into the ground.
• Also poisonous for fish and plankton in water bodies.
• Toxic for aquatic organisms.
• Other adverse effects:
• Remark: Toxic for fish

13. Disposal Considerations

General information

14. Transport Information

ADG label required

HAZCHEM

Not available.

UN Number

UN3082

Proper shipping name

• DOT Void
• ADR: 3082 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight ≤ 700))
• IMDG: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight ≤ 700)), MARINE POLLUTANT
• IATA: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight ≤ 700))

Transport hazard class

• ADR, IMDG, IATA
• Class: 9 Miscellaneous dangerous substances and articles
• Label: 9

Packing group

• DOT Void
• ADR, IMDG, IATA III

Environmental hazard

• Marine pollutant: Symbol (fish and tree)
• Special marking (ADR): Symbol (fish and tree)
• Special marking (IATA): Symbol (fish and tree)

Special precautions for users

Warning: Miscellaneous dangerous substances and articles.

Additional information

• ADR
• Excepted quantities (EQ) Code: E1
• Maximum net quantity per inner packaging: 30 mL
• Maximum net quantity per outer packaging: 1000 mL
• IMDG
• Limited quantities (LQ) 5L
• Excepted quantities (EQ) Code: E1
• Maximum net quantity per inner packaging: 30 mL
• Maximum net quantity per outer packaging: 1000 mL
• Special precautions for user Warning: Miscellaneous dangerous substances and articles
• Hazard identification number (Kemler code): 90
• EMS Number: F-A,S-F
• Stowage Category A
• UN "Model Regulation": UN 3082 ENVIRONMENTALLY HAZARDOUS SUBSTANCE,
• LIQUID, N.O.S. (REACTION PRODUCT: BISPHENOL-A- (EPICHLORHYDRIN) EPOXY RESIN (NUMBER AVERAGE MOLECULAR WEIGHT ≤ 700)), 9, III

15. Regulatory Information

Poisons Schedule Number

None of the ingredients is listed.

Other Information

• Sara
• Section 355 (extremely hazardous substances): None of the ingredients is listed.
• Section 313 (Specific toxic chemical listings): None of the ingredients is listed.
• TSCA (Toxic Substances Control Act): All components have the value ACTIVE.
• Hazardous Air Pollutants: None of the ingredients is listed.
• Proposition 65
• Chemicals known to cause cancer: None of the ingredients is listed.
• Chemicals known to cause reproductive toxicity for females: None of the ingredients is listed.
• Chemicals known to cause reproductive toxicity for males: None of the ingredients is listed.
• Chemicals known to cause developmental toxicity: None of the ingredients is listed.
• Carcinogenic categories
• EPA (Environmental Protection Agency): None of the ingredients is listed.
• TLV (Threshold Limit Value): None of the ingredients is listed.
• NIOSH-Ca (National Institute for Occupational Safety and Health): None of the ingredients is listed.
• GHS label elements The product is classified and labeled according to the Globally Harmonized System (GHS).

16. Other Information

SDS preparation date

20 April 2026

Comments

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.

References

EMS SDS Embed 812 Resin 13/08/2020 https://www.emsdiasum.com/docs/technical/msds/14900.pdf.