ProSciTech Safety Data Sheets ProSciTech Pty Ltd · proscitech.com.au

SAFETY DATA SHEET

Ferric Chloride Hexahydrate, ACS Grade

Version 1Last reviewed 23 February 2026Catalogue: 15510, EMS15510

1. Identification

Product Identifiers

Product Name
Ferric Chloride Hexahydrate, ACS Grade
Other Names
Not available.
Product Number(s)
15510, EMS15510
CAS Number
10025-77-1

Recommended use of the chemical and restriction on use

Laboratory chemicals. Membrane stains

Company Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

Emergency Contact Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

2. Hazards Identification

Classification of the substance or mixture

  • GHS05 Corrosion
  • Corrosive to Metals 1 H290 May be corrosive to metals.
  • Eye Damage 1 H318 Causes serious eye damage.
  • GHS07
  • Acute Toxicity - Oral 4 H302 Harmful if swallowed.
  • Skin Irritation 2 H315 Causes skin irritation.

Label Elements

Corrosive
Corrosive
Harmful / irritant
Harmful / irritant
Signal Words
None
Hazard Statement(s)
  • May be corrosive to metals.
  • Harmful if swallowed.
  • Causes skin irritation.
  • Causes serious eye damage.
Precautionary Statement(s)
  • Keep only in original container.
  • Wash thoroughly after handling.
  • Do not eat, drink or smoke when using this product.
  • Wear protective gloves/eye protection/face protection.

Primary route(s) of entry

Not available.

Human Health

Inhalation
Not available.
Ingestion
Call a poison centre/doctor if you feel unwell. Rinse mouth
Eyes
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison centre/doctor.
Skin
Wash with plenty of water. Take off contaminated clothing and wash it before reuse. If skin irritation occurs: Get medical advice/attention.

Environment

  • Absorb spillage to prevent material damage.
  • Store in corrosive resistant container with resistant inner liner.
  • Dispose of contents/container in accordance with local/regional/national/international regulations.

3. Composition / Information on Ingredients

No information provided.

4. First Aid Measures

Ingestion
Immediately call a doctor.
Inhalation
In case of unconsciousness place patient stably in side position for transportation.
Skin Contact
Immediately wash with water and soap and rinse thoroughly.
Eye Contact
Rinse opened eye for several minutes under running water. Then consult a doctor.
Other Information
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.

5. Firefighting Measures

Suitable extinguishing equipment

Fire
Use fire fighting measures that suit the environment.
HAZCHEM
No further relevant information available.

Special protective equipment and precautions for fire fighters

No special measures required.

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures
Not required.
Environmental precautions
Do not allow to enter sewers/surface or ground water.
Methods and materials for containment and clean up
Dispose contaminated material as waste according to item 13.

7. Handling and Storage

Precautions for safe handling
No special precautions are necessary if used correctly.
Conditions for safe storage
No special requirements.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls
  • Keep away from foodstuffs, beverages and feed.
  • Immediately remove all soiled and contaminated clothing.
  • Wash hands before breaks and at the end of work.
  • Avoid contact with the skin.
  • Avoid contact with the eyes and skin.

Personal protective equipment

Eye and face protection
Tightly sealed goggles.
Skin protection
Protective gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Body protection
Not available.
Respiratory protection
Not required.

9. Physical and Chemical Properties

General information

Appearance
Yellow-brown solid
Odour
Odourless
pH
Not applicable
Vapour Pressure
Not applicable.
Density
1.82 g/cm³
Boiling Point
Undetermined
Melting Point
Undetermined
Solubility
Soluble
Specific Gravity of Density
Not available.
Flash Point
Not applicable
Flammable (Explosive) Limits
Not determined.
Ignition Temperature
Not determined
Formula
FeCl3·6H2O

10. Stability and Reactivity

Reactivity
No further relevant information available.
Chemical stability
No decomposition if used according to specifications.
Possibility of hazardous reactions
No dangerous reactions known.
Conditions to avoid
No further relevant information available.
Incompatible materials
No further relevant information available.

11. Toxicological Information

Acute effects
Not available.
Eye contact
Strong irritant with the danger of severe eye injury.
Skin contact
Irritant to skin and mucous membranes.
Ingestion
Not available.
Inhalation
No sensitizing effects known.
Toxicity and irritation
Not available.

12. Ecological Information

Ecotoxicity
No further relevant information available.
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
No further relevant information available.
Other adverse effects
  • Water hazard class 1: Slightly hazardous for water.
  • Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
  • Rinse off of bigger amounts into drains or the aquatic environment may lead to decreased pH-values. A low pH-value harms aquatic organisms. In the dilution of the use-level the pH-value is considerably increased, so that after the use of the product the aqueous waste, emptied into drains, is only low water-dangerous.

13. Disposal Considerations

General information

  • Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
  • Disposal must be made according to official regulations.
  • Recommended cleansing agent: Water, if necessary with cleansing agents.

14. Transport Information

ADG label required

Marine pollutant
Marine pollutant
Class 8 Corrosive
Class 8 Corrosive
HAZCHEM
No further relevant information available.
UN Number
UN3260
Proper shipping name
3260 CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S., MARINE POLLUTANT
Transport hazard class
Class 8 Corrosive substances
Packing group
III
Environmental hazard
  • Marine pollutant: Yes (DOT)
  • Symbol (fish and tree)
Special precautions for users
  • Warning: Corrosive substances
  • Hazard identification number (Kemler code): 80
  • EMS Number: F-A,S-
  • Stowage Category: A
Additional information
  • DOT
  • Quantity limitations
  • On passenger aircraft/rail: 25kg
  • On Cargo aircraft only: 100kg
  • Special marking with the symbol (fish and tree)
  • ADR
  • Excepted quantities (EQ) Code: E1
  • Maximum net quantity per inner packaging: 30g
  • Maximum net quantity per outer packaging: 1000g
  • IMDG
  • Limited quantities (LQ) 5kg
  • Excepted quantities (EQ) Code: E1
  • Maximum net quantity per inner packaging: 30g
  • Maximum net quantity per outer packaging: 1000g

15. Regulatory Information

Poisons Schedule Number
Substance is not listed.
Other Information
A Chemical Safety Assessment has not been carried out.

16. Other Information

SDS preparation date
23 February 2026
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.