Version 1Last reviewed 23 February 2026Catalogue: QFP-00552-2
1. Identification
Product Identifiers
Product Name
Fluorescent Microparticles - Yellow
Other Names
N/A
Product Number(s)
QFP-00552-2
CAS Number
026628-22-8
Recommended use of the chemical and restriction on use
This material is only for purpose of technical analysis and/or scientific research. The health, toxicological, & eco-toxicological hazards of this substance have not been fully investigated; therefore, this substance must be handled only by, or under close supervision of those qualified in the handling and use of potentially hazardous substances. Not for domestic or food/drug/cosmetic use.
Company Details
ProSciTech Pty Ltd 11 Carlton Street KIRWAN QLD 4817 Australia (07) 4773 9444 pst@proscitech.com proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd 11 Carlton Street KIRWAN QLD 4817 Australia (07) 4773 9444 pst@proscitech.com proscitech.com.au
2. Hazards Identification
Classification of the substance or mixture
Not classified as hazardous according to Regulation (EC) 1272/2008 (CLP/GHS) or Directive 67/548/EEC as amended. Caution: This substance has not been fully tested (EC).
Label Elements
Signal Words
Warning
Hazard Statement(s)
Acute Tox 2. Acute toxicity category 2
H300 Fatal if swallowed.
H310 Fatal in contact with skin.
H330 Fatal if inhaled.
Aquatic Acute 1. Hazardous to the aquatic environment, acute, category 1
H400 Very toxic to aquatic life.
Aquatic Chronic 1. Hazardous to the aquatic environment, chronic, category 1
H410 Very toxic to aquatic life with long lasting effects.
T± Very Toxic
R28 Very toxic if swallowed
R32 Contact with acids liberates very toxic gas
N. Dangerous to the environment
R50-53 Very toxic to aquatic organisms, may cause long-term adverse guide for this product.
Precautionary Statement(s)
Not available.
Primary route(s) of entry
No further relevant information available.
Human Health
Inhalation
May be harmful if inhaled. May cause upper respiratory tract & mucous membrane irritation.
Rinse mouth with water, but do not swallow mouthwash. Do not induce vomiting. Give plenty of water to drink (ONLY IN CONSCIOUS PERSONS). Refer for medical attention.
Inhalation
Immediate fresh air & rest. Keep under observation and if breathing becomes difficult seek immediate medical attention. Resuscitate if breathing stops.
Skin Contact
Remove contaminated clothes. Rinse skin with plenty of water or shower. Refer for medical attention.
Eye Contact
First rinse with plenty of water for at least 10 minutes (remove contact lenses if easily possible), ensure lids remain open during flushing, and then seek immediate medical attention.
Other Information
No further relevant information available.
5. Firefighting Measures
Suitable extinguishing equipment
Fire
Use foam extinguishers or water spray
Large Fire
Use foam extinguishers or water spray.
HAZCHEM
Not available.
Special protective equipment and precautions for fire fighters
Wear self contained breathing apparatus with full face shield operated in positive pressure mode, MSHA/NIOSH (approved or equivalent), and full protective gear.
Forms combustible solid if allowed drying out. Emits corrosive & toxic fumes, including oxides of carbon, & nitrogen during combustion. May produce black acrid smoke if burned.
6. Accidental Release Measures
Personal precautions, protective equipment and emergency procedures
No further relevant information available.
Environmental precautions
Not available.
Methods and materials for containment and clean up
Clean up spills using an absorbent, non-combustible material and gather up placing in a clean closed container for disposal. Do not wash away into sewers.
7. Handling and Storage
Precautions for safe handling
Read the Suppliers' technical data Sheet carefully before commissioning or using the product.
Conditions for safe storage
Store unopened package at ambient temperature in a well ventilated place away from heat.
8. Exposure Controls / Personal Protection
Exposure Standards
Engineering controls
No components above the 0.1% threshold have specific workplace control parameters assigned to our knowledge.
Personal protective equipment
Eye and face protection
Safety glasses with side-shields conforming to EN 166
Skin protection
Suitable impervious gloves e.g. Nitrile or Neoprene rubber. The selected protective gloves have to conform to EN 374.
Body protection
Avoid contact of contents with skin, eyes, and clothing. Wash hands before breaks and immediately after handling the product.
Respiratory protection
If required to control exposure, use only suitable respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Local mechanical ventilation not required as supplied, but this is also dependent on other mobile phases and analytes used. Always use a fume cupboard if handling as the dry powder or where the liquid component may become airborne.
9. Physical and Chemical Properties
General information
Appearance
Cloudy Yellow
Odour
No information available
pH
No information available
Vapour Pressure
No information available
Density
No information available
Boiling Point
100°C (212°F)
Melting Point
No information available
Solubility
No information available
Specific Gravity of Density
No information available
Flash Point
Not applicable
Flammable (Explosive) Limits
Not applicable
Ignition Temperature
No information available
Formula
Dilute suspension of Non-Crosslinked Polystyrene beads organic dye stained in water with 0.02% Sodium Azide as preservative.
10. Stability and Reactivity
Reactivity
No further relevant information available.
Chemical stability
Stable
Possibility of hazardous reactions
Monomer maybe formed if heated to high temperatures. May release toxic fumes including oxides of carbon and nitrogen.
Conditions to avoid
Extreme heat
Incompatible materials
Strong oxidising agents, bases
11. Toxicological Information
Acute effects
No further relevant information available.
Eye contact
No further relevant information available.
Skin contact
May cause skin irritation.
Ingestion
May be harmful if swallowed.
Inhalation
May be harmful if inhaled.
Chronic effects
No further relevant information available.
Toxicity and irritation
May be harmful if absorbed through skin.
12. Ecological Information
Ecotoxicity
To the best of our knowledge, the ecotoxicological properties of this mixture have not been fully investigated. However, the liquid may be harmful to the environment depending on the quantity and dilution involved.
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
No further relevant information available.
Other adverse effects
No further relevant information available.
13. Disposal Considerations
General information
Methods of disposal must meet all local, state and national laws.
14. Transport Information
ADG label required
HAZCHEM
Not available.
UN Number
None.
Proper shipping name
Not regulated.
Transport hazard class
0
Packing group
None.
Environmental hazard
Not regulated.
Special precautions for users
Not regulated.
Additional information
Not regulated.
15. Regulatory Information
Poisons Schedule Number
Not regulated.
Other Information
No further information available.
16. Other Information
SDS preparation date
23 February 2026
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.