SAFETY DATA SHEET

Fomblin® 06/6 Vacuum Oil

Version 1Last reviewed 23 February 2026Catalogue: N/A

1. Identification

Product Identifiers

Product Name: Fomblin 06/6 Vacuum Oil
Other Names: Fluoropolymer, Mixture of (S) parafluoropropene and oxygen polymerised, amide derivative and Propene, 1,1,2,3,3,3 hexafluoro, oxidised, polymerised.
Product Number(s): N/A
CAS Number: 69991-67-9

Recommended use of the chemical and restriction on use

Laboratory use.
For use in vacuum pumps.

Company Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

Emergency Contact Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

2. Hazards Identification

Classification of the substance or mixture

No information available.

Label Elements

Signal Words: Warning
Hazard Statement(s): Clear, colourless liquid. Thermal decomposition will generate hydrogen fluoride (HF), which is corrosive.
Precautionary Statement(s): Not available.

Primary route(s) of entry

Not available.

Human Health

Inhalation: Inhalation of vapours or mists may cause respiratory tract irritation.
Ingestion: Not an expected exposure route. Ingestion may cause nausea and vomiting.
Eyes: Eye contact may cause slight irritation.
Skin: Skin contact may cause slight irritation.

Environment

Not available.

3. Composition / Information on Ingredients

Name	CAS No.	Content (w/w)	Classification
Propene, 1,1,2,3,3,3-hexafluoro, oxidised, polymerised	69991- 67-9	100	-

4. First Aid Measures

Ingestion: If conscious, drink three to four 8 ounce glasses of water or milk. Call a physician. If unconscious, immediately take affected person to a hospital. Do not give anything by mouth to an unconscious person.
Inhalation: If symptoms of irritation, discomfort or overcome by exposure, remove affected person to fresh air. Give oxygen or artificial respiration as needed.
Skin Contact: Wash skin thoroughly with mild soap and water. Flush with lukewarm water for 15 minutes.
Eye Contact: Flush eyes for 15 minutes with copious amounts of water, retracting eyelids often. Seek medical attention if irritation persists.
Other Information: No further relevant information available.

5. Firefighting Measures

Suitable extinguishing equipment

Fire: Water (spray or fog), foam, dry chemical or carbon dioxide (CO₂).
HAZCHEM: Fluoropolymers will degrade upon prolonged heating or in a fire, liberating carbonyl fluoride and hydrogen fluoride (HF). This gas is toxic if inhaled or it comes into contact with moist skin.
HF has an ACGIH TLV ceiling limit of 3 ppm (2.6 mg/m3) and an
OSHA PEL TWA of 3 ppm.
Carbonyl fluoride has an ACGIH TLV TWA and OSHA
PEL TWA of 2 ppm (5 mg/m3).

Special protective equipment and precautions for fire fighters

Use self contained breathing apparatus (SCBA) and skin protection for acid gas exposure.
Do not enter fire area without proper protection. Fight fire from a safe distance. If possible, air monitoring should be performed.

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures: Extinguish all ignition sources and evacuate the area. Exercise caution; spill area may be slippery.
Environmental precautions: Not available.
Methods and materials for containment and clean up: In case of a release or spill, absorb material onto vermiculite or similar inert absorbent.
Use Perfluorosolv0 PFS1 Solvent to clean any residual material. Place spilled material into covered container for disposal. Dispose of according to applicable local, state and federal regulations.

7. Handling and Storage

Precautions for safe handling: Wash hands after use and before handling food or applying cosmetics. Do not use tobacco products in the immediate area.
Conditions for safe storage: Keep containers closed. Keep away from heat,
sparks and flames. Do not store near combustible materials.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls: Local Exhaust: Vent vapours or mists generated by processing away from operating personnel. Local exhaust ventilation at a rate of 50 feet per minute.

Personal protective equipment

Eye and face protection: Not available.
Skin protection: Rubber or latex gloves recommended but not necessary.
Body protection: Not available.
Respiratory protection: No occupational exposure standards have been developed for this material. In situations where exposure to vapours or mists is likely, NIOSH/MSHA approved respirators are recommended. Respirator use limitations made by NIOSH/MSHA or the manufacturer must be observed. Respiratory protection programs must be in accordance with 29 CFR 1910.134.

9. Physical and Chemical Properties

General information

Appearance: Colourless clear liquid
Odour: Odorless
pH: Not available.
Vapour Pressure: Not available.
Density: 1.7 - 1.9
Boiling Point: Not available.
Melting Point: Not available.
Solubility: Water: Insoluble
Specific Gravity of Density: Not available.
Flash Point: Not applicable.
Flammable (Explosive) Limits: Not applicable.
Ignition Temperature: Not Applicable.
Formula: CF3-[(O-CF-CF3-CF2)n-(O-CF2)m]-O-CF3

10. Stability and Reactivity

Reactivity: This material is not reactive.
Chemical stability: This material is stable.
Possibility of hazardous reactions: Thermal decomposition of this product will generate hydrogen fluoride (HF), which is corrosive, causing burns on contact with skin and other tissue.
Conditions to avoid: Strong or non-aqueous alkali or Lewis acids above 100o C/212o F.
Incompatible materials: Alkali metals and halogenated compounds.

11. Toxicological Information

Acute effects: Rat oral LD50: greater than 25.65 g/kg
Rat intraperitoneal LD50: greater than 25 g/kg
Rat dermal LD50: greater than 2 g/kg
Eye contact: No further relevant information available.
Skin contact: No further relevant information available.
Ingestion: No further relevant information available.
Inhalation: No further relevant information available.
Toxicity and irritation: Rabbit skin irritation: not irritating.
Rabbit eye irritation: not irritating.
Guinea pig sensitization: not a sensitiser .

12. Ecological Information

Ecotoxicity: No ecotoxicological information is available for this material.
Persistence and degradability: No further relevant information available.
Bioaccumulative potential: No further relevant information available.
Other adverse effects: No further relevant information available.

13. Disposal Considerations

General information

All components of this product are listed on the Toxic Substances Control Act (TSCA)
Section 8(b) Chemical Inventory and the Canadian Environmental Protection Act
(CEPA) provisional domestic substances list (DSL). This product is not a "hazardous
substance" as defined by OSHA Hazard Communication Standard (29 CFR 1910.1200).
This product is not a "controlled product" as defined by the Canadian Workplace
Hazardous Materials Information System (WHMIS)

14. Transport Information

ADG label required

HAZCHEM: Fluoropolymers will degrade upon prolonged heating or in a fire, liberating carbonyl fluoride and hydrogen fluoride (HF). This gas is toxic if inhaled or it comes into contact with moist skin.
HF has an ACGIH TLV ceiling limit of 3 ppm (2.6 mg/m3) and an
OSHA PEL TWA of 3 ppm.
Carbonyl fluoride has an ACGIH TLV TWA and OSHA
PEL TWA of 2 ppm (5 mg/m3).
UN Number: None
Proper shipping name: Not regulated.
Transport hazard class: 0
Packing group: None.
Environmental hazard: No information available.
Special precautions for users: No information available.
Additional information: No information available.

15. Regulatory Information

Poisons Schedule Number: Not listed.
Other Information: No further relevant information available.

16. Other Information

SDS preparation date: 23 February 2026
Comments: This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.