Glutaraldehyde 10% in Solvents - Acetone

1. Identification

Product Identifiers

Product Name

Glutaraldehyde 10% in Solvents - Acetone

Other Names

Anhydrous 10% Glutaraldehyde in Acetone

Product Number(s)

16530, 16530 SPECIAL, 16533, EMS16530

CAS Number

Not available

Recommended use of the chemical and restriction on use

Company Details

Emergency Contact Details

2. Hazards Identification

Classification of the substance or mixture

Label Elements

Signal Words

None

Hazard Statement(s)

• Highly flammable liquid and vapour.
• Harmful if swallowed.
• Toxic if inhaled.
• Causes severe skin burns and eye damage.
• May cause allergy or asthma symptoms or breathing difficulties if inhaled.
• May cause an allergic skin reaction.
• May cause respiratory irritation.
• May cause drowsiness or dizziness.

Precautionary Statement(s)

• Keep away from heat/sparks/open flames/hot surfaces. No smoking.
• Ground/bond container and receiving equipment.
• Use explosion-proof electrical/ventilating/lighting equipment.
• Use only non-sparking tools.
• Take precautionary measures against static discharge.
• Do not breathe dusts or mists.
• Wash thoroughly after handling.
• Do not eat, drink or smoke when using this product.
• Use only outdoors or in a well-ventilated area.
• Contaminated work clothing should not be allowed out of the workplace.
• Wear protective gloves/protective clothing/eye protection/face protection.
• Wear respiratory protection.

Primary route(s) of entry

Human Health

Inhalation

Remove victim to fresh air and keep at rest in a position comfortable for breathing. If experiencing respiratory symptoms call a POISON CENTER/Doctor.

Ingestion

Call a POISON centre/doctor if you feel unwell. Rinse mouth. Do NOT induce vomiting.

Eyes

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/Doctor.

Skin

(or hair) Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. If skin irritation or rash occurs get medical advice/attention. Wash contaminated clothing before reuse.

Environment

3. Composition / Information on Ingredients

4. First Aid Measures

Ingestion

• Call for a doctor immediately.
• Drink plenty of water and provide fresh air. Call for a doctor immediately.

Inhalation

• Supply fresh air or oxygen; call for a doctor.
• In case of unconsciousness place patient stably in side position for transportation.

Skin Contact

Immediately wash with water and soap and rinse thoroughly.

Eye Contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Other Information

• Immediately remove any clothing soiled by the product.
• Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.
• Remove breathing equipment only after contaminated clothing have been completely removed.
• In case of irregular breathing or respiratory arrest provide artificial respiration.

5. Firefighting Measures

Suitable extinguishing equipment

Fire

CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

HAZCHEM

No further relevant information available.

Special protective equipment and precautions for fire fighters

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures

Wear protective equipment. Keep unprotected persons away.

Environmental precautions

• Inform respective authorities in case of seepage into water course or sewage system.
• Dilute with plenty of water.
• Do not allow to enter sewers/surface or ground water.

Methods and materials for containment and clean up

• Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
• Use neutralising agent.
• Dispose contaminated material as waste according to item 13.
• Ensure adequate ventilation.

7. Handling and Storage

Precautions for safe handling

• Ensure good ventilation/exhaustion at the workplace.
• open and handle receptacle with care.
• Prevent formation of aerosols.
• Keep ignition sources away - Do not smoke.
• Protect from heat.
• Protect against electrostatic charges.
• Keep respiratory protective device available.

Conditions for safe storage

• Keep container tightly sealed. Store in cool, dry conditions in well sealed receptacles.
• Protect from heat and direct sunlight.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls

• Keep away from foodstuffs, beverages and feed.
• Immediately remove all soiled and contaminated clothing.
• Wash hands before breaks and at the end of work.
• Store protective clothing separately.
• Avoid contact with the eyes.
• Avoid contact with the eyes and skin.

Personal protective equipment

Eye and face protection

Tightly sealed goggles.

Skin protection

Wear protective gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparations. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Body protection

Not available.

Respiratory protection

In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.

9. Physical and Chemical Properties

General information

Appearance

Colourless liquid

Odour

Pungent

pH

Not determined

Vapour Pressure

233hPa at 20°C

Density

0.92 g/cm³ at 20°C

Boiling Point

55°C

Melting Point

Undetermined

Solubility

Fully miscible

Specific Gravity of Density

Not determined

Flash Point

-19°C

Flammable (Explosive) Limits

• Lower: 2.6 Vol%
• Upper: 13 Vol%

Ignition Temperature

465°C

Formula

Not available

10. Stability and Reactivity

Reactivity

No further relevant information available.

Chemical stability

no decomposition if used according to specifications.

Possibility of hazardous reactions

No dangerous reactions known.

Conditions to avoid

no further relevant information available.

Incompatible materials

No further relevant information available.

11. Toxicological Information

Acute effects

Not available

Eye contact

• Strong caustic effect.
• Strong irritant with the danger of severe eye injury.

Skin contact

Strong caustic effect on skin and mucous membranes.

Ingestion

Swallowing will lead to a strong caustic effect on mouth and throat and the the danger of perforation of esophagus and stomach.

Inhalation

• Sensitisation possible through inhalation.
• Sensitisation possible through skin contact.

Toxicity and irritation

• Toxic
• Harmful
• Corrosive
• Irritant

12. Ecological Information

Ecotoxicity

No further relevant information available.

Persistence and degradability

No further relevant information available.

Bioaccumulative potential

No further relevant information available.

Other adverse effects

• Toxic for fish
• Harmful to fish
• Water hazard class 3: extremely hazardous for water.
• Do not allow product to reach ground water, water course or sewage system, even in small quantities.
• Must not reach sewage water or drainage ditch undiluted or unneutralised.
• Danger to drinking water if even extremely small quantities leak into the ground.
• Also poisonous for fish and plankton in water bodies.
• Toxic for aquatic organisms
• Harmful to aquatic organisms

13. Disposal Considerations

General information

14. Transport Information

ADG label required

HAZCHEM

No further relevant information available.

UN Number

UN2924

Proper shipping name

2924 FLAMMABLE LIQUID, CORROSIVE, N.O.S. (Glutaraldehyde, ACETONE)

Transport hazard class

• Class: 3 Flammable liquids
• Label: 3±8

Packing group

II

Environmental hazard

Not applicable

Special precautions for users

• Warning: Flammable liquids.
• Hazard identification number (Kemler code): 883
• EMS Number: F-E,S-C
• Segregation groups: Acids
• Stowage category: B
• Stowage code: SW2 Clear of living quarters.

Additional information

• Limited quantities (LQ) 1L
• Expected quantities (EQ) Code: E2
• Maximum net quantity per inner packaging: 30mL
• Maximum net quantity per outer packaging: 500mL
• Transport category: 1
• Tunnel restriction code: D/E

15. Regulatory Information

Poisons Schedule Number

• Acetone, Reagent Grade S5
• Glutaraldehyde S2, S5, S6

Other Information

• The product is classified and labelled according to the Globally Harmonised System (GHS)
• GHS02, GHS05, GHS06, GHS07, GHS08

16. Other Information

SDS preparation date

23 February 2026

Comments

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.