Remove victim to fresh air and keep at rest in a position comfortable for breathing. If experiencing respiratory symptoms: Call a POISON CENTRE/doctor.
Ingestion
Not available.
Eyes
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTRE/doctor if you feel unwell.
Skin
Wash with plenty of water. Take off contaminated clothing and wash it before reuse. If skin irritation or rash occurs: Get medical advice/attention.
Environment
Store in a well-ventilated place. Keep container tightly sealed. Store locked up. Dispose of contents/container in accordance with local/regional/national/international regulations.
3. Composition / Information on Ingredients
Name
CAS No.
Content (w/w)
Classification
Glutaraldehyde
111-30-8
≤2.5%
Mixture
sodium dimethylarsinate
124-65-2
≤2.5%
Mixture
4. First Aid Measures
Ingestion
Call for a doctor immediately.
Inhalation
Supply fresh air and to be sure call for a doctor.
In case of unconsciousness place patient stably in side position for transportation.
Skin Contact
Immediately wash with water and soap and rinse thoroughly.
Eye Contact
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Other Information
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.
5. Firefighting Measures
Suitable extinguishing equipment
Fire
Use fire extinguishing methods suitable to surrounding conditions.
HAZCHEM
No further relevant information available.
Special protective equipment and precautions for fire fighters
Mouth respiratory protective device.
6. Accidental Release Measures
Personal precautions, protective equipment and emergency procedures
Not required.
Environmental precautions
Inform respective authorities in case of seepage into water course or sewage system.
Do not allow to enter sewers/surface or ground water.
Methods and materials for containment and clean up
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
7. Handling and Storage
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols.
Conditions for safe storage
Keep container tightly sealed.
8. Exposure Controls / Personal Protection
Exposure Standards
Engineering controls
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.
Personal protective equipment
Eye and face protection
Tightly sealed goggles.
Skin protection
Wear protective gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Body protection
Not available.
Respiratory protection
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
9. Physical and Chemical Properties
General information
Appearance
Transparent liquid
Odour
Specific type.
pH
7.4
Vapour Pressure
23hPa
Density
1.01g/cm³
Boiling Point
100 °C
Melting Point
0 °C
Solubility
Not miscible or difficult to mix.
Specific Gravity of Density
Not available.
Flash Point
Not applicable.
Flammable (Explosive) Limits
Not determined
Ignition Temperature
Product is not selfigniting.
Formula
Not available.
10. Stability and Reactivity
Reactivity
No further relevant information available.
Chemical stability
No decomposition if used according to specifications.
Possibility of hazardous reactions
No dangerous reactions known.
Conditions to avoid
No further relevant information available.
Incompatible materials
No further relevant information available.
11. Toxicological Information
Acute effects
111-30-8 Glutaraldehyde
Oral LD50 134mg/kg
Dermal LD50 2560 mg/kg
Eye contact
Irritating effect.
Skin contact
Irritant to skin and mucous membranes. Sensitisation possible through skin contact.
Ingestion
Not available.
Inhalation
Sensitisation possible through inhalation.
Toxicity and irritation
Harmful
Irritant
12. Ecological Information
Ecotoxicity
no further relevant information available.
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
no further relevant information available.
Other adverse effects
Harmful to fish
Water hazard class 2: hazard for water
Do not allow product to reach ground water, water course or sewage system.
Danger to drinking water if even small quantities leak into the ground.
Harmful to aquatic organisms.
13. Disposal Considerations
General information
Must not be disposed together with household garbage. Do not allow product to reach sewage system. Disposal must be made according to official regulations.
14. Transport Information
ADG label required
HAZCHEM
No further relevant information available.
UN Number
Not regulated.
Proper shipping name
Not regulated.
Transport hazard class
Not regulated.
Packing group
not regulated.
Environmental hazard
Not applicable.
Special precautions for users
Not applicable.
Additional information
Not available.
15. Regulatory Information
Poisons Schedule Number
111-30-8 Glutaraldehyde S2, S5, S6
Other Information
A Chemical Safety Assessment has not been carried out.
16. Other Information
SDS preparation date
23 February 2026
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.