Version 1Last reviewed 24 February 2026Catalogue: C120
1. Identification
Product Identifiers
Product Name
Lead Acetate
Other Names
Lead Acetate
Product Number(s)
C120
CAS Number
6080-56-4
Recommended use of the chemical and restriction on use
Laboratory use. Used for preparation of lead stains.
Company Details
ProSciTech Pty Ltd 11 Carlton Street KIRWAN QLD 4817 Australia (07) 4773 9444 pst@proscitech.com proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd 11 Carlton Street KIRWAN QLD 4817 Australia (07) 4773 9444 pst@proscitech.com proscitech.com.au
2. Hazards Identification
Classification of the substance or mixture
Hazardous according to criteria of Hazardous Substances Information System [HSIS Worksafe Australia].
Label Elements
Signal Words
None
Hazard Statement(s)
HAZARDOUS SUBSTANCE. DANGEROUS GOODS.
Precautionary Statement(s)
Risk Phrases:
R20/22 Also harmful by inhalation and if swallowed.
R33 Danger of cumulative effects.
R50/53 Very toxic to aquatic organisms, may cause long-term effects in the aquatic environment.
R61 May cause harm to the unborn child.
R62 Possible risk of impaired fertility.
Safety Phrases:
S45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
S53 Avoid exposure-obtain special instructions before use.
S60 This material and its container must be disposed of as hazardous waste.
S61 Avoid release to the environment. Refer to special instructions/Material Safety Data Sheets.
Primary route(s) of entry
Not available.
Human Health
Inhalation
Not available.
Ingestion
Not available.
Eyes
Not available.
Skin
Not available.
Environment
No further relevant information available.
3. Composition / Information on Ingredients
No information provided.
4. First Aid Measures
Ingestion
Remove dentures if any. Watch for an obstruction in the victim's mouth. Remove if possible what is causing the obstruction but do not force fingers or a hard object between the victim's teeth. Have conscious person drink several glasses of water or milk. INDUCE VOMITING by sticking finger in throat. Seek immediate medical attention.
Serious Ingestion: Examine the lips and mouth to ascertain whether the tissues are damaged, a possible indication that the toxic material was ingested; the absence of such signs, however, is not conclusive. Remove dentures if any. Watch for an obstruction in the victim's mouth. Remove if possible what is causing the obstruction but do not force fingers or a hard object between the victim's teeth. If a soft pad can be inserted between the victim's teeth, it will protect the tongue from being bitten. A badly bleeding tongue immensely complicates the patient's problems. Have conscious person drink several glasses of water or milk. INDUCE VOMITING by sticking finger in throat. Lower the head so that the vomit will not re-enter the mouth and throat. If convulsions occur, do not restrain the victim, but do remove objects with which he (she) might injure himself (herself) or orient the victim to prevent him (her) from striking fixed heavy objects. If the convulsions cease, turn the victim on side or face down so that any fluid in the mouth will drain. Seek immediate medical attention.
Inhalation
Allow the victim to rest in a well ventilated area. Seek immediate medical attention.
Serious Inhalation: Evacuate the victim to a safe area as soon as possible. Loosen tight clothing such as a collar, tie, belt or waistband. If breathing is difficult, administer oxygen. If the victim is not breathing, perform mouth-to-mouth resuscitation. WARNING: It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation when the inhaled material is toxic, infectious or corrosive. Seek immediate medical attention.
Skin Contact
If the chemical got onto the clothed portion of the body, remove the contaminated clothes as quickly as possible, protecting your own hands and body. Place the victim under a deluge shower. If the chemical touches the victim's exposed skin, such as the hands: Gently and thoroughly wash the contaminated skin with running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin. COLD water may be used. Cover the irritated skin with an emollient. If irritation persists, seek medical attention. Wash contaminated clothing before reusing.
Eye Contact
Check for and remove any contact lenses. IMMEDIATELY flush eyes with running water for at least 15 minutes, keeping eyelids open. COLD water may be used. DO NOT use an eye ointment. Seek medical attention.
Other Information
No further relevant information available.
5. Firefighting Measures
Suitable extinguishing equipment
Fire
Use DRY chemicals, CO₂, water spray or foam.
Large Fire
Use water spray, fog or foam. DO NOT use water jet.
HAZCHEM
2Z
Special protective equipment and precautions for fire fighters
No special measures required.
6. Accidental Release Measures
Personal precautions, protective equipment and emergency procedures
Not available.
Environmental precautions
Not available.
Methods and materials for containment and clean up
SMALL SPILL: Use appropriate tools to put the spilled solid in convenient waste disposal container.
LARGE SPILL: Poisonous solid. Stop leak if without risk. DO NOT get water inside container. DO NOT touch spilled material. Use water spray to reduce vapours. Prevent entry into sewers, basements or confined areas; dike if needed. Eliminate all sources of ignition. Call for assistance on disposal.
7. Handling and Storage
Precautions for safe handling
Keep locked up. Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk; evaporate the residue under a fume hood. Ground all equipment containing material. DO NOT ingest. DO NOT breathe dust. Avoid contact with eyes. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment. If ingested, seek medical advice immediately and show the container or the label.
Conditions for safe storage
Keep container dry. Keep in a cool place. Ground all equipment containing material. Keep container tightly closed. Keep in a cool, well-ventilated place. Highly toxic or infectious materials should be stored in a separate locked safety storage cabinet or room.
8. Exposure Controls / Personal Protection
Exposure Standards
Engineering controls
Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Personal protective equipment
Eye and face protection
Splash goggles
Skin protection
Gloves
Body protection
Lab coat
Respiratory protection
Dust respirator. Be sure to use a MSHA/NIOSH approved respirator or equivalent. Wear appropriate respirator when ventilation is inadequate.
9. Physical and Chemical Properties
General information
Appearance
Solid
Odour
Not available.
pH
Not available.
Vapour Pressure
Not available.
Density
Not available.
Boiling Point
Decomposes at 100°C.
Melting Point
75°C.
Solubility
Easily soluble in water.
Specific Gravity of Density
2.55 (water = 1).
Flash Point
Not available.
Flammable (Explosive) Limits
Not available.
Ignition Temperature
Not available.
Formula
Not available.
10. Stability and Reactivity
Reactivity
No further relevant information available.
Chemical stability
Stable under normal conditions of use.
Possibility of hazardous reactions
Will not occur.
Conditions to avoid
No further relevant information available.
Incompatible materials
No specific information is available regarding the reactivity of this material in presence of various other materials.
11. Toxicological Information
Acute effects
No further relevant information available.
Eye contact
Slightly dangerous to dangerous in case of eye contact (irritant).
Skin contact
Very slightly too slightly dangerous in case of skin contact (irritant, permeator).
Ingestion
Very dangerous in case of ingestion. Can be fatal if ingested.
Inhalation
Slightly dangerous to dangerous in case of inhalation. Can be fatal if inhaled.
Toxicity and irritation
Group 2B: Possibly carcinogenic to humans.
12. Ecological Information
Ecotoxicity
Not available.
Persistence and degradability
Not available.
Bioaccumulative potential
Not available.
Other adverse effects
No further relevant information available.
13. Disposal Considerations
General information
Recycle to process, if possible. Consult your local or regional authorities.
14. Transport Information
ADG label required
HAZCHEM
2Z
UN Number
UN1616
Proper shipping name
Lead Acetate
Transport hazard class
6
Packing group
PG III
Environmental hazard
No information available.
Special precautions for users
Not available.
Additional information
No further relevant information available.
15. Regulatory Information
Poisons Schedule Number
S6
Other Information
No further information available.
16. Other Information
SDS preparation date
24 February 2026
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
References
List of Publications referenced when creating this MSDS;
Hazardous Substances Information System Consolidated Lists: Safe Work Australia.
APPROVED CRITERIA FOR CLASSIFYING HAZARDOUS SUBSTANCES [NOHSC:1008(2004)] 3rd Edition: National Occupational Health and Safety Commission.