ProSciTech Safety Data Sheets ProSciTech Pty Ltd · proscitech.com.au

SAFETY DATA SHEET

Lowicryl - K11M Initiator C

Version 1Last reviewed 28 November 2024Catalogue: C450_1

1. Identification

Product Identifiers

Product Name
Lowicryl K11M - Initiator C
Other Names
Lowicryl K11M Kit
Product Number(s)
C450_1
CAS Number
3524-62-7

Recommended use of the chemical and restriction on use

Laboratory use.

Company Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

Emergency Contact Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

2. Hazards Identification

Classification of the substance or mixture

  • GHS06 Skull and crossbones
  • Acute Tox. 3 H301 Toxic if swallowed.
  • GHS07
  • Acute Tox. 4 H332 Harmful if inhaled.
  • Skin Irrit. 2 H315 Causes skin irritation.
  • Eye Irrit. 2 H319 Causes serious eye irritation

Label Elements

Acute toxicity
Acute toxicity
Harmful / irritant
Harmful / irritant
Signal Words
None
Hazard Statement(s)
  • Toxic if swallowed.
  • Harmful if inhaled.
  • Causes skin irritation.
  • Causes serious eye irritation.
Precautionary Statement(s)
  • Avoid breathing dust/fume/gas/mist/vapours/spray.
  • Wear protective gloves. Wear eye protection / face protection.
  • Wash thoroughly after handling.
  • Do not eat, drink or smoke when using this product.
  • Use only outdoors or in a well-ventilated area.

Primary route(s) of entry

Not available.

Human Health

Inhalation
  • Remove person to fresh air and keep comfortable for breathing. If skin irritation occurs: Get medical advice/attention.
  • Rinse mouth.
Ingestion
Immediately call a POISON CENTER/doctor. Rinse mouth.
Eyes
  • Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • If eye irritation persists: Get medical advice/attention.
Skin
  • Wash with plenty of water.
  • Take off contaminated clothing and wash it before reuse. If skin irritation occurs: Get medical advice/attention.

Environment

  • Store locked up.
  • Dispose of contents/container in accordance with local/regional/national/international regulations.

3. Composition / Information on Ingredients

NameCAS No.Content (w/w)Classification
Benzoin Methyl Ether3524-62-7--

4. First Aid Measures

Ingestion
Do not induce vomiting; Call for medical help immediately.
Inhalation
In case of irregular breathing or respiratory arrest provide artificial respiration. Supply fresh air; consult doctor in case of complaints. In case of unconsciousness place patient stably in side position for transportation.
Skin Contact
Immediately remove any clothing soiled by the product. Immediately wash with water and soap and rinse thoroughly.
Eye Contact
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Other Information
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.

5. Firefighting Measures

Suitable extinguishing equipment

Fire
CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
HAZCHEM
Not available.

Special protective equipment and precautions for fire fighters

No special measures required.

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures
Not required.
Environmental precautions
Do not allow to enter sewers/ surface or ground water.
Methods and materials for containment and clean up
Dispose contaminated material as waste according to item 13.

7. Handling and Storage

Precautions for safe handling
No special precautions are necessary if used correctly.
Conditions for safe storage
  • Store in a dry place. Store in a closed container.
  • Keep container tightly sealed.
  • Keep cool.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls
Keep cool.

Personal protective equipment

Eye and face protection
Tightly sealed goggles.
Skin protection
  • Protection of hands.
  • The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
  • Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
  • Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
  • Material of gloves.
  • The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
  • Penetration time of glove material.
  • The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Body protection
  • Keep away from foodstuffs, beverages and feed.
  • Immediately remove all soiled and contaminated clothing.
  • Wash hands before breaks and at the end of work.
  • Avoid contact with the eyes.
  • Avoid contact with the eyes and skin.
Respiratory protection
Not required.

9. Physical and Chemical Properties

General information

Appearance
Crystalline powder
Odour
Characteristic.
pH
Not applicable.
Vapour Pressure
Not applicable.
Density
Not determined.
Boiling Point
Not determined.
Melting Point
50 °C
Solubility
Insoluble in water solubility at 20 °C
Specific Gravity of Density
Not applicable
Flash Point
110 °C
Flammable (Explosive) Limits
Not determined.
Ignition Temperature
Not determined.
Formula
Not available.

10. Stability and Reactivity

Reactivity
No further relevant information available.
Chemical stability
No decomposition if used according to specifications.
Possibility of hazardous reactions
No dangerous decomposition products known.
Conditions to avoid
No further relevant information available.
Incompatible materials
Reducing agents.

11. Toxicological Information

Acute effects
No further relevant information available.
Eye contact
Irritating effect.
Skin contact
Irritant to skin and mucous membranes.
Ingestion
No further relevant information available.
Inhalation
No sensitising effects known.
Toxicity and irritation
No further relevant information available.

12. Ecological Information

Ecotoxicity
No further relevant information available.
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
No further relevant information available.
Other adverse effects
Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.

13. Disposal Considerations

General information

  • Must not be disposed together with household garbage. Do not allow product to reach sewage system.
  • Uncleaned packaging
  • Recommendation: Disposal must be made according to official regulations.

14. Transport Information

ADG label required

Class 6.1 Toxic
Class 6.1 Toxic
HAZCHEM
Not available.
UN Number
UN3288
Proper shipping name
3288 TOXIC SOLID, INORGANIC, N.O.S (Benzoin Methyl Ether)
Transport hazard class
6.1 Toxic substances.
Packing group
III
Environmental hazard
No information available.
Special precautions for users
  • Warning: Toxic substances
  • Danger code (Kemler): 60
  • EMS Number: F-A,S-A
  • Stowage Category: A
Additional information
  • ADG
  • Limited quantities (LQ) 5 kg
  • Excepted quantities (EQ) Code: E1
  • Maximum net quantity per inner packaging: 30 g Maximum net quantity per outer packaging: 1000 g Transport category 2
  • Tunnel restriction code E

15. Regulatory Information

Poisons Schedule Number
Substance is not listed.
Other Information
No further relevant information available.

16. Other Information

SDS preparation date
28 November 2024
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.