Lowicryl K11M - Monomer I

1. Identification

Product Identifiers

Product Name

Lowicryl K11M - Monomer I

Other Names

Lowicryl K11M Kit

Product Number(s)

C450_2

CAS Number

-

Recommended use of the chemical and restriction on use

Company Details

Emergency Contact Details

2. Hazards Identification

Classification of the substance or mixture

Label Elements

Signal Words

None

Hazard Statement(s)

• Harmful in contact with skin.
• Causes severe skin burns and eye damage.
• May cause an allergic skin reaction.
• May cause respiratory irritation.

Precautionary Statement(s)

• Wear protective gloves.
• Wear protective gloves / protective clothing.
• Wear eye protection / face protection.
• Wash thoroughly after handling.
• Use only outdoors or in a well-ventilated area.
• Contaminated work clothing should not be allowed out of the workplace.

Primary route(s) of entry

Human Health

Inhalation

Remove person to fresh air and keep comfortable for breathing.

Ingestion

Rinse mouth. Do NOT induce vomiting. Take off contaminated clothing and wash it before reuse.

Eyes

• Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• Immediately call a POISON CENTER/doctor. Specific treatment (see on this label).

Skin

• (or hair): Take off immediately all contaminated clothing. Rinse skin with water//shower.
• Wash contaminated clothing before reuse. If skin irritation or rash occurs: Get medical advice/attention.

Environment

3. Composition / Information on Ingredients

4. First Aid Measures

Ingestion

Drink plenty of water and provide fresh air. Call for a doctor immediately.

Inhalation

Supply fresh air and to be sure call for a doctor. In case of unconsciousness place patient stably in side position for transportation.

Skin Contact

Immediately wash with water and soap and rinse thoroughly.

Eye Contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Other Information

Immediately remove any clothing soiled by the product. Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.

5. Firefighting Measures

Suitable extinguishing equipment

Fire

CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

HAZCHEM

Not available.

Special protective equipment and precautions for fire fighters

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures

Wear protective equipment. Keep unprotected persons away.

Environmental precautions

Do not allow to enter sewers/ surface or ground water.

Methods and materials for containment and clean up

• Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
• Use neutralising agent.
• Dispose contaminated material as waste according to item 13. Ensure adequate ventilation.

7. Handling and Storage

Precautions for safe handling

• Ensure good ventilation/exhaustion at the workplace.
• Prevent formation of aerosols

Conditions for safe storage

Keep container tightly sealed.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls

No special requirements.

Personal protective equipment

Eye and face protection

Tightly sealed goggles.

Skin protection

• Protective gloves
• The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
• Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
• Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
• Material of gloves.
• The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
• Penetration time of glove material.
• The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Body protection

• Keep away from foodstuffs, beverages and feed.
• Immediately remove all soiled and contaminated clothing
• Wash hands before breaks and at the end of work.
• Avoid contact with the eyes.
• Avoid contact with the eyes and skin.

Respiratory protection

In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.

9. Physical and Chemical Properties

General information

Appearance

Liquid Colour: According to product specification.

Odour

Characteristic

pH

Not determined.

Vapour Pressure

at 20 °C: 3 hPa

Density

1.029 g/cm³

Boiling Point

246 °C

Melting Point

Undetermined.

Solubility

Not miscible or difficult to mix with water.

Specific Gravity of Density

Not applicable.

Flash Point

> 93 °C

Flammable (Explosive) Limits

Not determined

Ignition Temperature

290 °C

Formula

Not available.

10. Stability and Reactivity

Reactivity

No further relevant information available.

Chemical stability

No decomposition if used according to specifications.

Possibility of hazardous reactions

No dangerous reactions known.

Conditions to avoid

No further relevant information available.

Incompatible materials

No further relevant information available.

11. Toxicological Information

Acute effects

No further relevant information available.

Eye contact

• Strong caustic effect.
• Strong irritant with the danger of severe eye injury.

Skin contact

Strong caustic effect on skin and mucous membranes.

Ingestion

No further relevant information available.

Inhalation

Sensitisation possible through skin contact.

Toxicity and irritation

• The product shows the following dangers according to the calculation method of the General EU Classification Guidelines for Preparations as issued in the latest version:
• Harmful
• Corrosive
• Irritant
• Swallowing will lead to a strong caustic effect on mouth and throat and to the danger of perforation of esophagus and stomach.

12. Ecological Information

Ecotoxicity

No further relevant information available.

Persistence and degradability

No further relevant information available.

Bioaccumulative potential

No further relevant information available.

Other adverse effects

• Water hazard class 2 (German Regulation) (Self-assessment): hazardous for water Do not allow product to reach ground water, water course or sewage system.
• Must not reach sewage water or drainage ditch undiluted or unneutralised.
• Danger to drinking water if even small quantities leak into the ground.

13. Disposal Considerations

General information

14. Transport Information

ADG label required

HAZCHEM

Not available.

UN Number

UN3082

Proper shipping name

3082 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (2-hydroxyethyl acrylate).

Transport hazard class

9 M

Packing group

III

Environmental hazard

• Product contains environmentally hazardous substances: 2- hydroxyethyl acrylate
• Marine pollutant: Yes

Special precautions for users

• Warning: Miscellaneous dangerous substances and articles.
• Danger code (Kemler): 90
• EMS Number: F-A,S-F

Additional information

• ADG
• Limited quantities (LQ) 5L
• Excepted quantities (EQ) Code: E1
• Maximum net quantity per inner packaging: 30 m.l
• Maximum net quantity per outer packaging: 1000 ml.
• Transport category 3
• Tunnel restriction code E

15. Regulatory Information

Poisons Schedule Number

None of the ingredients is listed.

Other Information

No further relevant information available.

16. Other Information

SDS preparation date

28 November 2024

Comments

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.