Lowicryl K4M - Monomer B

1. Identification

Product Identifiers

Product Name

Lowicryl K4M - Monomer B

Other Names

Lowicryl K4M Kit

Product Number(s)

14330 (B), EMS14330

CAS Number

Not available

Recommended use of the chemical and restriction on use

Company Details

Emergency Contact Details

2. Hazards Identification

Classification of the substance or mixture

Label Elements

Signal Words

None

Hazard Statement(s)

• Hazard-determining components of labelling:
• 2-hydroxyethyl acrylate
• mequinol
• Harmful if swallowed.
• Fatal in contact with skin.
• Harmful if inhaled.
• Causes severe skin burns and eye damage.
• May cause an allergic skin reaction.

Precautionary Statement(s)

• Do not breathe dusts or mists.
• Do not get in eyes, on skin, or on clothing.
• Wash thoroughly after handling.
• Do not eat, drink or smoke when using this product.
• Use only outdoors or in a well-ventilated area.
• Contaminated work clothing should not be allowed out of the workplace.
• Wear protective gloves/protective clothing/eye protection/face protection.

Primary route(s) of entry

Human Health

Inhalation

Remove victim to fresh air and keep at rest in a position comfortable for breathing.

Ingestion

Call a POISON CENTER/doctor if you feel unwell. Rinse mouth. Do NOT induce vomiting.

Eyes

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/Doctor.

Skin

(or hair) Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. Take off immediately all contaminated clothing and wash it before reuse. If skin irritation or rash occurs: Get medical advice/attention.

Environment

3. Composition / Information on Ingredients

4. First Aid Measures

Ingestion

• Call for a doctor immediately.
• Drink plenty of water and provide fresh air. Call for a doctor immediately.

Inhalation

• Supply fresh air and to be sure call for a doctor.
• In case of unconsciousness place patient stably in side position for transportation.

Skin Contact

Immediately wash with water and soap and rinse thoroughly.

Eye Contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Other Information

• Immediately remove any clothing soiled by the product.
• Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.

5. Firefighting Measures

Suitable extinguishing equipment

Fire

CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

HAZCHEM

No further relevant information available.

Special protective equipment and precautions for fire fighters

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures

Wear protective equipment. Keep unprotected persons away.

Environmental precautions

• Inform respective authorities in case of seepage into water course or sewage system.
• Dilute with plenty of water.
• Do not allow to enter sewers/surface or ground water.

Methods and materials for containment and clean up

• Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
• Use neutralising agent.
• Dispose contaminated waste according to item 13.
• Ensure adequate ventilation.

7. Handling and Storage

Precautions for safe handling

• Ensure good ventilation/exhaustion at the workplace.
• Prevent formation of aerosols.

Conditions for safe storage

Keep container tightly sealed.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls

• Keep away from foodstuffs, beverages and feed.
• Immediately remove all soiled and contaminated clothing.
• Wash hands before breaks and at the end of work.
• Store protective clothing separately.
• Avoid contact with the eyes and skin.

Personal protective equipment

Eye and face protection

Tightly sealed goggles.

Skin protection

Protective gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Body protection

Wear protective clothing.

Respiratory protection

In case of brief exposure or low pollution use respiratory filter device. in case of intensive or longer exposure use self-contained respiratory protective device.

9. Physical and Chemical Properties

General information

Appearance

Colourless liquid

Odour

Recognisable

pH

Not determined

Vapour Pressure

Not determined

Density

1.026g/cm³

Boiling Point

>246°C

Melting Point

Undetermined

Solubility

Fully miscible

Specific Gravity of Density

Not available

Flash Point

>93°C

Flammable (Explosive) Limits

Not determined

Ignition Temperature

Not available.

Formula

Not available

10. Stability and Reactivity

Reactivity

No further relevant information available.

Chemical stability

No decomposition if used according to specifications.

Possibility of hazardous reactions

No dangerous reactions known.

Conditions to avoid

No further relevant information available.

Incompatible materials

No further relevant information available.

11. Toxicological Information

Acute effects

Not available.

Eye contact

Strong caustic effect.

Skin contact

Strong caustic effect on skin and mucous membranes. Sensitisation possible through skin contact.

Ingestion

Swallowing will lead to a strong caustic effect on mouth and throat and to the danger of perforation of oesophagus and stomach.

Inhalation

Not available.

Toxicity and irritation

• Harmful
• Corrosive
• Irritant
• Very toxic
• Danger through skin adsorption.

12. Ecological Information

Ecotoxicity

No further relevant information available.

Persistence and degradability

No further relevant information available.

Bioaccumulative potential

No further relevant information available.

Other adverse effects

• Water hazard class 3: extremely hazardous for water.
• Do not allow product to reach ground water, water course or sewage system, even in small quantities.
• Must not reach sewage water or drainage ditch undiluted or unneutralised.
• Danger to drinking water if even extremely small quantities leak into the ground.
• Also poisonous for fish and plankton in water bodies.
• Very toxic for aquatic organisms.

13. Disposal Considerations

General information

14. Transport Information

ADG label required

HAZCHEM

No further relevant information available.

UN Number

UN2810

Proper shipping name

2810 TOXIC LIQUID, ORGANIC, N.O.S. (2-hydroxyethyl acrylate), ENVIRONMENTALLY HAZARDOUS, MARINE POLLUTANT

Transport hazard class

• Class: 6.1 Toxic substances
• Label: 9

Packing group

III

Environmental hazard

• Product contains environmentally hazardous substances: 2-hydroxyethyl acrylate
• Marine pollutant: Symbol (fish and tree)

Special precautions for users

• Warning: Toxic substances.
• Hazard identification number (Kemler code): 90
• EMS Number: F-A,S-A
• Stowage Category: A
• Stowage Code: SW2 Clear of living quarters.

Additional information

• Limited quantities (LQ) 5L
• Excepted quantities (EQ) Code: E1
• Maximum net quantity per inner packaging: 30mL
• Maximum net quantity per outer packaging: 1000mL
• Transport category: 3
• Tunnel restriction code: E

15. Regulatory Information

Poisons Schedule Number

None of the ingredients are listed.

Other Information

A Chemical Safety Assessment has not been carried out.

16. Other Information

SDS preparation date

28 November 2024

Comments

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.