ProSciTech Safety Data Sheets ProSciTech Pty Ltd · proscitech.com.au

SAFETY DATA SHEET

LR Gold Resin

Version 1Last reviewed 16 November 2023Catalogue: 14370, 14371, C028

1. Identification

Product Identifiers

Product Name
LR Gold Resin
Other Names
N/A
Product Number(s)
14370, 14371, C028
CAS Number
-

Recommended use of the chemical and restriction on use

  • Laboratory use
  • .Embedding Resin.

Company Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

Emergency Contact Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

2. Hazards Identification

Classification of the substance or mixture

  • GHS08 Health hazard
  • Carcinogenicity 2 H351 Suspected of causing cancer.

Label Elements

Health hazard
Health hazard
Signal Words
Warning
Hazard Statement(s)
  • Hazard-determining components of labelling:
  • N,N-dimethyl-p-toludine
  • Suspected of causing cancer.
Precautionary Statement(s)
  • Obtain special instructions before use.
  • Do not handle until all safety precautions have been read and understood.
  • Wear protective gloves/protective clothing/eye protection/face protection.
  • If exposed or concerned. Get medical advice/attention.
  • Store locked up.
  • Dispose of contents/container in accordance with local/regional/national/international regulations.

Primary route(s) of entry

Not available.

Human Health

Inhalation
If exposed or concerned: Get medical attention.
Ingestion
If exposed or concerned: Get medical attention.
Eyes
If exposed or concerned: Get medical attention.
Skin
Wear protective gloves/protective clothing/eye protection/face protection.

Environment

  • Store locked up.
  • Dispose of contents/container in accordance with local/regional/national/international regulations.

3. Composition / Information on Ingredients

NameCAS No.Content (w/w)Classification
N,N-dimethyl-p-toludine99-97-8≤2.5%-
-
-

4. First Aid Measures

Ingestion
If symptoms persist consult doctor.
Inhalation
Supply fresh air; consult doctor in case of complaints.
Skin Contact
Generally the product does not irritate the skin.
Eye Contact
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Other Information
No further relevant information available.

5. Firefighting Measures

Suitable extinguishing equipment

Fire
Use fire extinguishing methods suitable to surrounding conditions.
HAZCHEM
Not available.

Special protective equipment and precautions for fire fighters

No special measures required.

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures
Not required.
Environmental precautions
Dilute with plenty of water. Do not allow to enter sewers/ surface or ground water.
Methods and materials for containment and clean up
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Ensure adequate ventilation.

7. Handling and Storage

Precautions for safe handling
No special precautions are necessary if used correctly.
Conditions for safe storage
No special requirements.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls
Protect from heat.

Personal protective equipment

Eye and face protection
Goggles recommended during refilling.
Skin protection
  • Protective gloves
  • The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
  • Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
  • Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
  • Material of gloves.
  • The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
  • Penetration time of glove material.
  • The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Body protection
  • Keep away from foodstuffs, beverages and feed.
  • Immediately remove all soiled and contaminated clothing
  • Wash hands before breaks and at the end of work.
  • Avoid contact with the eyes and skin.
Respiratory protection
Not required.

9. Physical and Chemical Properties

General information

Appearance
Colourless liquid
Odour
Characteristic
pH
Not determined.
Vapour Pressure
Not determined.
Density
1g/cm3
Boiling Point
>300°C
Melting Point
Undetermined.
Solubility
Fully miscible.
Specific Gravity of Density
Not determined.
Flash Point
105 °C
Flammable (Explosive) Limits
Not determined.
Ignition Temperature
Not determined.
Formula
Not available.

10. Stability and Reactivity

Reactivity
No further relevant information available.
Chemical stability
No decomposition if used according to specifications
Possibility of hazardous reactions
No dangerous reactions known.
Conditions to avoid
No further relevant information available.
Incompatible materials
No further relevant information available.

11. Toxicological Information

Acute effects
No further relevant information available.
Eye contact
No irritant effect.
Skin contact
No irritating effect.
Ingestion
No further relevant information available.
Inhalation
No sensitizing effects known.
Toxicity and irritation
  • IARC (International Agency for Research on Cancer)
  • 99-97-8 N,N-dimethyl-p-toludine
  • 2B

12. Ecological Information

Ecotoxicity
No further relevant information available.
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
No further relevant information available.
Other adverse effects
  • Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water.
  • Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.

13. Disposal Considerations

General information

  • Must not be disposed together with household garbage. Do not allow product to reach sewage system.
  • Uncleaned packaging:
  • Recommendation: Disposal must be made according to official regulations.
  • Recommended cleansing agent: Water, if necessary with cleansing agents.

14. Transport Information

ADG label required

HAZCHEM
Not available.
UN Number
None.
Proper shipping name
Not regulated.
Transport hazard class
Void
Packing group
None.
Environmental hazard
Not applicable.
Special precautions for users
Not applicable.
Additional information
No information available.

15. Regulatory Information

Poisons Schedule Number
  • TSCA (Toxic Substances Control Act):
  • 24448-20-2 Polyhydroxy Di ethoylated Bisphenol-A dimethacrylate ACTIVE
  • 99-97-8 N,N-dimethyl-p-toludine ACTIVE
Other Information
No further relevant information available.

16. Other Information

SDS preparation date
16 November 2023
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.