ProSciTech Safety Data Sheets ProSciTech Pty Ltd · proscitech.com.au

SAFETY DATA SHEET

Periodic Acid, ACS Grade

Version 1Last reviewed 28 November 2024Catalogue: 19325, EMS19325

1. Identification

Product Identifiers

Product Name
Periodic Acid, ACS Grade
Other Names
Not available
Product Number(s)
19325, EMS19325
CAS Number
10450-60-9

Recommended use of the chemical and restriction on use

Laboratory chemicals

Company Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

Emergency Contact Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

2. Hazards Identification

Classification of the substance or mixture

  • GHS03 Flame over circle
  • Ox. Sol. 2 H272 May intensify fire; oxidiser.
  • GHS05 Corrosion
  • Skin Corr. 1B H314 Causes severe skin burns and eye damage.
  • Eye Dam. 1 H318 Causes serious eye damage.

Label Elements

Oxidising
Oxidising
Corrosive
Corrosive
Signal Words
None
Hazard Statement(s)
  • Hazard-determining components of labelling: orthoperiodic acid
  • May intensify fire; oxidiser.
  • Causes severe skin burns and eye damage.
Precautionary Statement(s)
  • Keep away from heat.
  • Keep/store away from clothing/combustible materials.
  • Take any precaution to avoid mixing with combustibles.
  • Do not breathe dusts or mists.
  • Wash thoroughly after handling.
  • Wear protective gloves/protective clothing/eye protection/face protection.

Primary route(s) of entry

Not available.

Human Health

Inhalation
Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Ingestion
Rinse mouth. Do NOT induce vomiting.
Eyes
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. immediately call a POISON CENTER/doctor.
Skin
(or hair) Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse.

Environment

  • In case of fire: Use CO₂, powder or water spray for extinction.
  • Store locked up.
  • Dispose of contents/container in accordance with local/regional/national/international regulations.

3. Composition / Information on Ingredients

No information provided.

4. First Aid Measures

Ingestion
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Inhalation
In case of unconsciousness place patient stably in side position for transportation.
Skin Contact
Immediately wash with water and soap and rinse thoroughly.
Eye Contact
Rinse opened eye for several minutes under running water. Then consult a doctor.
Other Information
Immediately remove any clothing soiled by the product.

5. Firefighting Measures

Suitable extinguishing equipment

Fire
CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
HAZCHEM
No further relevant information available.

Special protective equipment and precautions for fire fighters

No special measures required.

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures
Wear protective equipment. Keep unprotected persons away.
Environmental precautions
Do not allow to enter sewers/surface or ground water.
Methods and materials for containment and clean up
  • Use neutralising agent.
  • Dispose contaminated material as waste according to item 13.
  • Ensure adequate ventilation.

7. Handling and Storage

Precautions for safe handling
Thorough dedusting.
Conditions for safe storage
Keep container tightly sealed.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls
  • Keep away from foodstuffs, beverages and feed.
  • Immediately remove all soiled and contaminated clothing.
  • Wash hands before breaks and at the end of work.
  • Avoid contact with the eyes.
  • Avoid contact with the eyes and skin.

Personal protective equipment

Eye and face protection
Tightly sealed goggles.
Skin protection
Protective gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Body protection
Protective clothing.
Respiratory protection
Not required.

9. Physical and Chemical Properties

General information

Appearance
White crystalline
Odour
Odourless
pH
Not applicable.
Vapour Pressure
Not applicable.
Density
1.4g/cm³
Boiling Point
Undetermined
Melting Point
122°C
Solubility
2430g/l
Specific Gravity of Density
Not available.
Flash Point
Not applicable.
Flammable (Explosive) Limits
Not determined
Ignition Temperature
Not determined
Formula
H5IO6

10. Stability and Reactivity

Reactivity
No further relevant information available.
Chemical stability
No decomposition if used according to specifications.
Possibility of hazardous reactions
No dangerous reactions known.
Conditions to avoid
No further relevant information available.
Incompatible materials
No further relevant information available.

11. Toxicological Information

Acute effects
Not available.
Eye contact
  • Strong caustic effect.
  • Strong irritant with the danger of severe eye injury.
Skin contact
Strong caustic effect on skin and mucous membranes.
Ingestion
Swallowing will lead to a strong caustic effect on mouth and throat and to the danger of perforation of oesophagus and stomach.
Inhalation
No sensitising effects known.
Toxicity and irritation
Not available.

12. Ecological Information

Ecotoxicity
No further relevant information available.
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
No further relevant information available.
Other adverse effects
  • Water hazard class 2: hazardous for water.
  • Do not allow product to reach ground water, water course or sewage system.
  • Must not reach sewage water or drainage ditch undiluted or unneutralised.
  • Danger to drinking water if even small quantities leak into the ground.
  • Rinse off of bigger amounts into drains or the aquatic environment may lead to decreased pH-values. A low pH-value harms aquatic organisms. In the dilution of the use-level the pH-value is considerably increased, so that after the use of the product the aqueous waste, emptied into drains, is only low water-dangerous.

13. Disposal Considerations

General information

  • Must not be disposed together with household garbage. Do not allow product to reach sewage system.
  • Disposal must be made according to official regulations.
  • Recommended cleansing agents: Water, if necessary together with cleansing agents.

14. Transport Information

ADG label required

Class 5.1 Oxidising agent
Class 5.1 Oxidising agent
Class 8 Corrosive
Class 8 Corrosive
HAZCHEM
No further relevant information available.
UN Number
UN3085
Proper shipping name
3085OXIDISING SOLID, CORROSIVE, N.O.S.
Transport hazard class
  • Class 5.1 Oxidising substances
  • Label 5.1±8
Packing group
II
Environmental hazard
Not applicable.
Special precautions for users
  • Warning: Oxidising agents
  • EMS Number: F-A
Additional information
  • Limited quantities (LQ) 1kg
  • Excepted quantities (EQ) Code: E2
  • Maximum net quantity per inner packaging: 30g
  • Maximum net quantity per outer packaging: 500g

15. Regulatory Information

Poisons Schedule Number
Substance is not listed.
Other Information
A Chemical Safety Assessment has not been carried out.

16. Other Information

SDS preparation date
28 November 2024
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.