SAFETY DATA SHEET

PHEM Buffer - 0.2M

Version 1Last reviewed 2 March 2026Catalogue: EMS11164; EMS11165

1. Identification

Product Identifiers

Product Name: PHEM Buffer - 0.2M
Other Names: N/A
Product Number(s): EMS11164; EMS11165
CAS Number: N/A

Recommended use of the chemical and restriction on use

Laboratory use

Company Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

Emergency Contact Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

2. Hazards Identification

Classification of the substance or mixture

GHS07
Acute Tox. 4 H302 Harmful if swallowed

Label Elements

Signal Words: Warning
Hazard Statement(s): Harmful if swallowed.
Precautionary Statement(s): Wash thoroughly after handling.
Do not eat, drink or smoke when using this product.
If swallowed, Call a poison centre or doctor if you feel unwell.
Rinse mouth.
Dispose of contents or containers in accordance with local, regional, national/international regulations

Primary route(s) of entry

No data

Human Health

Inhalation: No further relevant information available
Ingestion: No further relevant information available
Eyes: No further relevant information available
Skin: No further relevant information available

Environment

Must not be disposed of with household garbage. Do not allow the product to reach the sewage system.

3. Composition / Information on Ingredients

No information provided.

4. First Aid Measures

Ingestion: Immediately call a doctor.
Inhalation: Supply fresh air; consult a doctor in case of complaints.
Skin Contact: Generally, the product does not irritate the skin.
Eye Contact: Rinse the opened eye for several minutes under running water.
Other Information: No further relevant information is available.

5. Firefighting Measures

Suitable extinguishing equipment

Fire: Use fire fighting measures that suit the environment
HAZCHEM: No further relevant information is available.

Special protective equipment and precautions for fire fighters

No special measures required

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures: No further relevant information is available.
Environmental precautions: No special measures required.
Methods and materials for containment and clean up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.

7. Handling and Storage

Precautions for safe handling: Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols.
Conditions for safe storage: No special requirements

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls: Keep away from foodstuffs, beverages and feed.
Wash hands before breaks and at the end of work.

Personal protective equipment

Eye and face protection: Goggles recommended during refilling
Skin protection: The glove material has to be impermeable and resistant to the product/ the substance/ the preparation
Body protection: The glove material has to be impermeable and resistant to the product/ the substance/ the preparation
Respiratory protection: In cases of brief exposure or low pollution, use a respiratory filter device. In case of intensive or longer exposure, use respiratory protective device that is independent of circulating air

9. Physical and Chemical Properties

General information

Appearance: Colourless liquid
Odour: Odorless
pH: Not determined
Vapour Pressure: At 20 °C (68 °F): 23 hPa (17.3 mm Hg)
Density: At 20 °C (68 °F): 1 g/cm³ (8.345 lbs/gal)
Boiling Point: 100 °C (212 °F)
Melting Point: 0 °C (32 °F)
Solubility: Not miscible or difficult to mix
Specific Gravity of Density: Not determined
Flash Point: Not determined
Flammable (Explosive) Limits: Not determined
Ignition Temperature: Product is not selfigniting
Formula: Water: 97.1 %
VOC content: 0.00 %
0.0 g/l / 0.00 lb/gal
Solids content: 0.0 %

10. Stability and Reactivity

Reactivity: No further relevant information is available.
Chemical stability: No further relevant information is available.
Possibility of hazardous reactions: No further relevant information is available.
Conditions to avoid: No further relevant information is available.
Incompatible materials: No further relevant information is available.

11. Toxicological Information

Acute effects: No further relevant information is available.
Eye contact: No irritating effect
Skin contact: No irritant effect
Ingestion: No further relevant information is available.
Inhalation: No further relevant information is available.
Toxicity and irritation: No further relevant information is available.

12. Ecological Information

Ecotoxicity: No further relevant information is available.
Persistence and degradability: No further relevant information is available.
Bioaccumulative potential: No further relevant information is available.
Other adverse effects: No further relevant information is available.

13. Disposal Considerations

General information

Must not be disposed of together with household garbage. Do not allow product to reach sewage system

14. Transport Information

ADG label required

HAZCHEM: No further relevant information is available.
UN Number: Not applicable
Proper shipping name: Not applicable
Transport hazard class: Not applicable
Packing group: Not applicable
Environmental hazard: Not applicable
Special precautions for users: Not applicable
Additional information: Not applicable

15. Regulatory Information

Poisons Schedule Number: None of the ingredients are listed
Other Information: No further relevant information is available.

16. Other Information

SDS preparation date: 2 March 2026
Comments: This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
References: No further relevant information is available.