Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Ingestion
Get medical advice/attention if you feel unwell.
Eyes
Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. If exposed or concerned: Get medical advice/attention. If eye irritation persists: Get medical advice/attention.
Skin
(or hair) Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. Take off contaminated clothing and wash it before reuse. If skin irritation or rash occurs: Get medical advice/attention. Brush off loose particles from skin. Immerse in cool water/wrap in wet bandages.
Environment
In case of fire: Use CO, sand, extinguishing powder for extinction.
Store in a dry place. Store in a closed container.
Store in a well-ventilated place. Keep container tightly closed.
Store in a well-ventilated place. Keep cool.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
3. Composition / Information on Ingredients
Name
CAS No.
Content (w/w)
Classification
Acetone, Reagent Grade
67-64-1
>10-≤25%
Mixtures
4-chloro-alpha,alpha,alpha-trifluorotoluene
98-56-6
>10-≤25%
Mixtures
ethylbenzene
100-41-4
≤2.5%
Mixtures
4. First Aid Measures
Ingestion
If symptoms persist consult a doctor.
Inhalation
Supply fresh air and to be sure call for a doctor.
In case of unconsciousness place patient stably in side position for transportation.
Skin Contact
Immediately wash with water and soap and rinse thoroughly.
Eye Contact
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Other Information
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.
5. Firefighting Measures
Suitable extinguishing equipment
Fire
CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
HAZCHEM
For safety reasons unsuitable extinguishing agents: Water.
Special protective equipment and precautions for fire fighters
Mouth respiratory protective device.
6. Accidental Release Measures
Personal precautions, protective equipment and emergency procedures
Inform respective authorities in case of seepage into wate course or sewage system.
Dilute with plenty of water.
Do not allow to enter sewers/surface or ground water.
Methods and materials for containment and clean up
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
Do not flush with water or aqueous cleansing agents.
7. Handling and Storage
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols.
Keep ignition sources away - Do not smoke.
Protect from heat.
Protect against electrostatic charges.
Conditions for safe storage
Keep container tightly sealed.
Store in cool, dry conditions in well sealed receptacles.
Protect from heat and direct sunlight.
8. Exposure Controls / Personal Protection
Exposure Standards
Material
TWA ppm
TWA mg/m³
STEL ppm
STEL mg/m³
Acetone, Reagent Grade
500ppm
1185mg/m³
1000ppm
2375mg/m³
ethybenzene
100ppm
434mg/m³
125ppm
543mg/m³
Engineering controls
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.
Personal protective equipment
Eye and face protection
Tightly sealed goggles.
Skin protection
Wear protective gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Body protection
Wear protective clothing.
Respiratory protection
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
9. Physical and Chemical Properties
General information
Appearance
Silver-coloured liquid
Odour
Characteristic.
pH
Not determined.
Vapour Pressure
245.3hPa
Density
1.618g/cm³
Boiling Point
56°C
Melting Point
Undetermined
Solubility
fully miscible.
Specific Gravity of Density
Not available.
Flash Point
-16°C
Flammable (Explosive) Limits
Not determined.
Ignition Temperature
Spontaneously flammable in air.
Formula
Not available.
10. Stability and Reactivity
Reactivity
No further relevant information available.
Chemical stability
No decomposition if used according to specifications.
Possibility of hazardous reactions
Contact with water releases flammable gases.
Conditions to avoid
No further relevant information available.
Incompatible materials
No further relevant information available.
11. Toxicological Information
Acute effects
Not available.
Eye contact
Irritating effect.
Skin contact
Irritant to skin and mucous membranes.
Ingestion
Not available.
Inhalation
Sensitisation possible through skin contact.
Toxicity and irritation
Harmful
Irritant
12. Ecological Information
Ecotoxicity
Toxic for fish.
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
No further relevant information available.
Other adverse effects
Water hazard class 2: hazardous for water.
Do not allow product to reach ground water, water course or sewage system.
Danger to drinking water if even small quantities leak into the ground.
Also poisonous for fish and plankton in water bodies.
Toxic for aquatic organisms.
13. Disposal Considerations
General information
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Disposal must be made according to official regulations.
Recommended cleansing agents: Water, if necessary together with cleansing agents.
14. Transport Information
ADG label required
Marine pollutantClass 3 Flammable liquid
HAZCHEM
For safety reasons unsuitable extinguishing agents: Water.
A Chemical Safety Assessment has not been carried out.
16. Other Information
SDS preparation date
27 November 2024
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.