Silver Conductive Paint, 503

1. Identification

Product Identifiers

Product Name

Silver Conductive Paint, 503 - DISCONTINUED

Other Names

Not available.

Product Number(s)

12686-15, 12686-15SP, EMS12686-15

CAS Number

Not available.

Recommended use of the chemical and restriction on use

Company Details

Emergency Contact Details

2. Hazards Identification

Classification of the substance or mixture

Label Elements

Signal Words

None

Hazard Statement(s)

• Hazard-determining components of labelling: 4-methylpentan-2-one
• Highly flammable liquid and vapour.
• Causes serious eye irritation.
• Suspected of causing cancer.
• May cause respiratory irritation.

Precautionary Statement(s)

• Obtain special instructions before use.
• Do not handle until all safety precautions have been read and understood.
• Keep away from heat/sparks/open flames/hot surfaces. No smoking.
• Ground/bond container and receiving equipment.
• Use explosion-proof electrical/ventilating/lighting equipment.
• Use only non-sparking tools.
• Take precautionary measures against static discharge.
• Avoid breathing dust/fume/gas/mist/vapour/spray.
• Wash thoroughly after handling.
• Use only outdoors or in well-ventilated area.
• Wear protective gloves/protective clothing/eye protection/face protection.

Primary route(s) of entry

Human Health

Inhalation

Remove victim to fresh air and keep at rest in a position comfortable for breathing.

Ingestion

Not available.

Eyes

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If exposed or concerned: Get medical advice/attention. Call a POISON CENTER /doctor if you feel unwell. If eye irritation persists: Get medical advice/attention.

Skin

(or hair) Remove/take off immediately all contaminated clothing. Rinse skin with water/shower.

Environment

3. Composition / Information on Ingredients

4. First Aid Measures

Ingestion

If symptoms persist consult doctor.

Inhalation

• Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist.
• In case of unconsciousness place patient stably inside position for transportation.

Skin Contact

Generally the product does not irritate the skin.

Eye Contact

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

Other Information

Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.

5. Firefighting Measures

Suitable extinguishing equipment

Fire

CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

HAZCHEM

No further relevant information available.

Special protective equipment and precautions for fire fighters

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures

Wear protective equipment. Keep unprotected persons away.

Environmental precautions

• Dilute with plenty of water.
• Do not allow to enter sewers/surface or ground water.

Methods and materials for containment and clean up

• Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
• Dispose contaminated material as waste according to item 13.
• Ensure adequate ventilation.

7. Handling and Storage

Precautions for safe handling

• Ensure good ventilation/exhaustion at the workplace.
• Prevent formation of aerosols.
• Keep ignition sources away - Do not smoke.
• Protect from heat.
• Protect against electrostatic charges.

Conditions for safe storage

• Store in a cool location.
• Keep container tightly sealed.
• Store in cool, dry conditions in well sealed receptacles.
• Protect from heat and direct sunlight.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls

• Keep away from foodstuffs, beverages and feed.
• Immediately remove all soiled and contaminated clothing.
• Wash hands before breaks and at the end of work.
• Avoid contact with the eyes.
• Avoid contact with the eyes and skin.

Personal protective equipment

Eye and face protection

Tightly sealed goggles.

Skin protection

Wear protective gloves. The glove material has to be impermeable to the product/ the substance/the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Body protection

Wear protective clothing.

Respiratory protection

In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.

9. Physical and Chemical Properties

General information

Appearance

Silver-coloured liquid

Odour

Solvent-like

pH

7

Vapour Pressure

20hPa

Density

1.77g/cm³

Boiling Point

116°C

Melting Point

<0°C

Solubility

Fully miscible

Specific Gravity of Density

Not available.

Flash Point

16°C

Flammable (Explosive) Limits

• Lower: 1.2 Vol%
• Upper: 8 Vol%

Ignition Temperature

Product is not selfigniting.

Formula

Not available.

10. Stability and Reactivity

Reactivity

No further relevant information available.

Chemical stability

No decomposition if used according to specifications.

Possibility of hazardous reactions

No dangerous reactions known.

Conditions to avoid

No further relevant information available.

Incompatible materials

No further relevant information available.

11. Toxicological Information

Acute effects

• 108-10-1 4-methylpentan-2-one
• Oral LD50 2080mg/kg (rat)
• Dermal LD50 16000mg/kg (rabbit)
• Inhalative LC50/4 h 8.3-16.6 mg/l (rat)

Eye contact

Irritating effect.

Skin contact

No irritant effect.

Ingestion

Not available.

Inhalation

No sensitising effects known.

Toxicity and irritation

• Harmful
• Irritant

12. Ecological Information

Ecotoxicity

No further relevant information available.

Persistence and degradability

No further relevant information available.

Bioaccumulative potential

No further relevant information available.

Other adverse effects

• Water hazard class 1: slightly hazardous for water.
• Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.

13. Disposal Considerations

General information

14. Transport Information

ADG label required

HAZCHEM

No further relevant information available.

UN Number

UN1245

Proper shipping name

1245 METHYL ISOBUTYL KETONE

Transport hazard class

3 flammable liquids

Packing group

II

Environmental hazard

Yes (DOT) Symbol (fish and tree)

Special precautions for users

• Warning: Flammable liquids.
• Hazard identification number (Kemler code): 33
• EMS Number: F-E,S-D
• Stowage category: A

Additional information

• Limited quantities (LQ): 5L
• Excepted quantities (EQ): Code: E1
• Maximum net quantity per inner packaging: 30mL
• Maximum net quantity per outer packaging: 1000ml

15. Regulatory Information

Poisons Schedule Number

• 7440-22-4 silver S2
• 108-10-1 4-methylpentan-2-one S5

Other Information

A Chemical Safety Assessment has not been carried out.

16. Other Information

SDS preparation date

27 February 2026

Comments

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.