ProSciTech Safety Data Sheets ProSciTech Pty Ltd · proscitech.com.au

SAFETY DATA SHEET

Sodium Thiosulphate Aqueous Solutions - 2%

Version 1Last reviewed 1 March 2026Catalogue: 21360-2, EMS21360-2

1. Identification

Product Identifiers

Product Name
Sodium Thiosulphate Aqueous Solutions - 2%
Other Names
Synonyms
Product Number(s)
21360-2, EMS21360-2
CAS Number
7732-18-5

Recommended use of the chemical and restriction on use

Laboratory use.

Company Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

Emergency Contact Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

2. Hazards Identification

Classification of the substance or mixture

  • GHS07
  • Acute toxicity - oral 4 H302 Harmful if swallowed.
  • Acute toxicity - dermal 4 H312 Harmful in contact with skin.
  • Acute toxicity - inhalation 4 H332 Harmful if inhaled.
  • Skin irritation 2 H315 Causes skin irritation.
  • Eye irritation 2B H320 Causes eye irritation

Label Elements

Harmful / irritant
Harmful / irritant
Signal Words
Warning
Hazard Statement(s)
  • GHS07
  • Acute toxicity - oral 4 H302 Harmful if swallowed.
  • Acute toxicity - dermal 4 H312 Harmful in contact with skin.
  • Acute toxicity - inhalation 4 H332 Harmful if inhaled.
  • Skin irritation 2 H315 Causes skin irritation.
  • Eye irritation 2B H320 Causes eye irritation.
  • Harmful if swallowed, in contact with skin or if inhaled.
  • Causes skin and eye irritation.
Precautionary Statement(s)
  • Avoid breathing dust/fume/gas/mist/vapours/spray
  • Wash thoroughly after handling.
  • Do not eat, drink or smoke when using this product.

Primary route(s) of entry

Not Available

Human Health

Inhalation
Remove person to fresh air and keep comfortable for breathing.
Ingestion
  • Call a poison center/doctor if you feel unwell.
  • Rinse mouth.
Eyes
  • Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • If eye irritation persists: Get medical advice/attention
Skin
  • Use only outdoors or in a well-ventilated area.
  • Wear protective gloves / protective clothing.
  • Wash with plenty of water.
  • If skin irritation occurs: Get medical advice/attention.
  • Take off contaminated clothing and wash it before reuse.

Environment

  • Store in a well-ventilated place. Keep container tightly closed.
  • Dispose of contents/container in accordance with local/regional/national/international regulations.

3. Composition / Information on Ingredients

NameCAS No.Content (w/w)Classification
Sodium Thiosulphate Pentahydrate10102-17-71-5%Not Available

4. First Aid Measures

Ingestion
Immediately call a doctor
Inhalation
  • Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist.
  • In case of unconsciousness place patient stably in side position for transportation.
Skin Contact
Immediately wash with water and soap and rinse thoroughly.
Eye Contact
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Other Information
  • General information:
  • Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours
  • after the accident.

5. Firefighting Measures

Suitable extinguishing equipment

Fire
Use fire fighting measures that suit the environment.
HAZCHEM
No further relevant information available.

Special protective equipment and precautions for fire fighters

Mouth respiratory protective device.

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures
Not required.
Environmental precautions
Dilute with plenty of water
Methods and materials for containment and clean up
  • Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
  • Dispose contaminated material as waste according to section 13.
  • Ensure adequate ventilation.

7. Handling and Storage

Precautions for safe handling
  • Ensure good ventilation/exhaustion at the workplace.
  • Prevent formation of aerosols.
  • information about protection against explosions and fires: No special measures required.
Conditions for safe storage
  • Requirements to be met by storerooms and receptacles: No special requirements.
  • Information about storage in one common storage facility: Not required.
  • Further information about storage conditions: Keep receptacle tightly sealed.
  • Specific end use(s): No further relevant information available.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls
No further data; see section 7.

Personal protective equipment

Eye and face protection
Tightly sealed goggles.
Skin protection
  • Protective gloves
  • The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
  • Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the
  • chemical mixture.
  • Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
  • Material of gloves
  • The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
  • varies from manufacturer to manufacturer.
  • Penetration time of glove material
  • The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
  • observed.
Body protection
  • Keep away from foodstuffs, beverages and feed.
  • Immediately remove all soiled and contaminated clothing.
  • Wash hands before breaks and at the end of work.
  • Avoid contact with the eyes and skin.
Respiratory protection
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air.

9. Physical and Chemical Properties

General information

Appearance
Clear Liquid
Odour
Characteristic
pH
Mixture is non-polar/aprotic
Vapour Pressure
at 20 °C (68 °F): 23 hPa (17.3 mm Hg)
Density
at 20 °C (68 °F): 1 g/cm³ (8.345 lbs/gal)
Boiling Point
100 °C (212 °F)
Melting Point
0 °C (32 °F)
Solubility
Fully miscible with water
Specific Gravity of Density
Not determined
Flash Point
Not determined
Flammable (Explosive) Limits
Product does not present an explosion hazard.
Ignition Temperature
Not determined.
Formula
Na₂S₂O?

10. Stability and Reactivity

Reactivity
No further relevant information available.
Chemical stability
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Possibility of hazardous reactions
No dangerous reactions known.
Conditions to avoid
No further relevant information available.
Incompatible materials
No further relevant information available.

11. Toxicological Information

Acute effects
Not Applicable
Eye contact
Irritating effect
Skin contact
Irritant to skin and mucous membranes.
Ingestion
No sensitizing effects known
Inhalation
No sensitizing effects known
Toxicity and irritation
No interactive effects between components are known.

12. Ecological Information

Ecotoxicity
Not hazardous for water
Persistence and degradability
No further relevant information available
Bioaccumulative potential
No further relevant information available
Other adverse effects
No further relevant information available.

13. Disposal Considerations

General information

  • Must not be disposed of together with household garbage. Do not allow product to reach sewage system
  • Uncleaned packagings:
  • Recommendation: Disposal must be made according to official regulations.
  • Recommended cleansing agent: Water, if necessary with cleansing agents.

14. Transport Information

ADG label required

HAZCHEM
No further relevant information available.
UN Number
Void
Proper shipping name
Void
Transport hazard class
Void
Packing group
Void
Environmental hazard
Not applicable.
Special precautions for users
Not applicable.
Additional information
Not applicable.

15. Regulatory Information

Poisons Schedule Number
  • Section 355 (extremely hazardous substances): None of the ingredients is listed.
  • Section 313 (Specific toxic chemical listings): None of the ingredients is listed.
Other Information
  • Hazard statements
  • Harmful if swallowed, in contact with skin or if inhaled.
  • Causes skin and eye irritation.
  • Precautionary statements
  • Avoid breathing dust/fume/gas/mist/vapours/spray
  • Wash thoroughly after handling.
  • Do not eat, drink or smoke when using this product.
  • Use only outdoors or in a well-ventilated area.
  • Wear protective gloves / protective clothing.
  • If swallowed: Call a poison center/doctor if you feel unwell.
  • Rinse mouth.
  • If on skin: Wash with plenty of water.
  • Specific treatment (see on this label).
  • If inhaled: Remove person to fresh air and keep comfortable for breathing.
  • If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
  • Continue rinsing.
  • If skin irritation occurs: Get medical advice/attention.
  • Take off contaminated clothing and wash it before reuse.
  • If eye irritation persists: Get medical advice/attention.
  • Store in a well-ventilated place. Keep container tightly closed.
  • Dispose of contents/container in accordance with local/regional/national/international regulations.
  • Chemical safety assessment: A Chemical Safety Assessment has not been carried out.

16. Other Information

SDS preparation date
1 March 2026
Comments
  • Abbreviations and acronyms:
  • ADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International
  • Carriage of Dangerous Goods by Road)
  • IMDG: International Maritime Code for Dangerous Goods
  • DOT: US Department of Transportation
  • IATA: International Air Transport Association
  • EINECS: European Inventory of Existing Commercial Chemical Substances
  • ELINCS: European List of Notified Chemical Substances
  • CAS: Chemical Abstracts Service (division of the American Chemical Society)
  • NFPA: National Fire Protection Association (USA)
  • HMIS: Hazardous Materials Identification System (USA)
  • VOC: Volatile Organic Compounds (USA, EU)
  • PBT: Persistent, Bioaccumulative and Toxic
  • vPvB: very Persistent and very Bioaccumulative
References
EMS Sodium Thiosulphate, 2% Aqueous https://www.emsdiasum.com/docs/technical/msds/21360-2.pdf 28/12/2021