SAFETY DATA SHEET

Technovit 9100 MMA Embedding Kit - Hardener 1 New

Version 1Last reviewed 27 November 2024Catalogue: 14655 (H1), EMS14655

1. Identification

Product Identifiers

Product Name: Technovit 9100 MMA Embedding Kit - Hardener 1 New
Other Names: Technovit 9100 Hardener 1 New
Product Number(s): 14655 (H1), EMS14655
CAS Number: Not available.

Recommended use of the chemical and restriction on use

Laboratory chemicals.

Company Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

Emergency Contact Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

2. Hazards Identification

Classification of the substance or mixture

GHS02 Flame
Self-react. EF H242 Heating may cause a fire.
Org. Perox. CD H242 Heating may cause a fire.
GHS08 Health hazard
Repr. 2 H361 Suspected of damaging fertility or the unborn child.
GHS07
Eye Irrit. 2 H319 Causes serious eye irritation.
Skin Sens. 1 H317 May cause an allergic skin reaction.

Label Elements

Signal Words: None
Hazard Statement(s): Hazard-determining components of labelling: dibenzoyl peroxide
Heating may cause a fire.
Heating may cause a fire.
Causes serious eye irritation.
May cause an allergic skin reaction.
Suspected of damaging fertility or the unborn child.
Precautionary Statement(s): Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Keep/store away from clothing/combustible materials.
Avoid breathing dust/fume/gas/mist/vapours/spray.
Wear protective gloves/eye protection/face protection.
Keep only in original container.
Wash thoroughly after handling.
Contaminated work clothing should not be allowed out of the workplace.
Obtain special instructions before use.
Do not handle until all safety precautions have been read and understood.

Primary route(s) of entry

Not available.

Human Health

Inhalation: If exposed or concerned: Get medical advice/attention.
Ingestion: If exposed or concerned get medical advice/attention.
Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Skin: Wash contaminated clothing before reuse. If skin irritation or rash occurs: Get medical advice/attention. Wash with plenty of water.

Environment

In case of fire: Use for extinction: CO₂, powder or water spray.
Store locked up.
Protect from sunlight.
Store away from other materials.
Store in a well-ventilated place. Keep cool.
Dispose of contents/container in accordance with local/regional/national/international regulations.

3. Composition / Information on Ingredients

Name	CAS No.	Content (w/w)	Classification
dibenzoyl peroxide	94-36-0	25-50%	Not Available

4. First Aid Measures

Ingestion: If symptoms persist, consult a doctor.
Inhalation: Supply fresh air and to be sure call for a doctor.
In case of unconsciousness place patient stably in side position for transportation.
Skin Contact: Immediately wash with water and soap and rinse thoroughly.
Eye Contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Other Information: No further relevant information available.

5. Firefighting Measures

Suitable extinguishing equipment

Fire: CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
HAZCHEM: No further relevant information available.

Special protective equipment and precautions for fire fighters

No special measures required.

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures: Not required.
Environmental precautions: Inform respective authorities in case of seepage into water course or sewage system.
Do not allow to enter sewers/surface or ground water.
Methods and materials for containment and clean up: Dispose contaminated material as waste according to item 13.

7. Handling and Storage

Precautions for safe handling: Open and handle receptacle with care.
Protect from heat.
Keep respiratory protective device available.
Conditions for safe storage: Keep container tightly sealed.
Protect from heat and direct sunlight.

8. Exposure Controls / Personal Protection

Exposure Standards

Material	TWA ppm	TWA mg/m³	STEL ppm	STEL mg/m³
94-36-0 dibenzoyl peroxide		5mg/m³

Engineering controls: Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Avoid contact with the eyes.
Avoid contact with the eyes and skin.

Personal protective equipment

Eye and face protection: Tightly sealed goggles
Skin protection: Protective gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Thye exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Body protection: Protective clothing.
Respiratory protection: Not required.

9. Physical and Chemical Properties

General information

Appearance: White powder
Odour: Odourless
pH: Not applicable.
Vapour Pressure: 1hPa
Density: 1.23g/cm³
Boiling Point: Undetermined
Melting Point: Undetermined
Solubility: Insoluble
Specific Gravity of Density: Not available.
Flash Point: 55°C
Flammable (Explosive) Limits: Not determined.
Ignition Temperature: Not determined
Formula: Not available.

10. Stability and Reactivity

Reactivity: No further relevant information available.
Chemical stability: No decomposition if used according to specifications.
Possibility of hazardous reactions: No dangerous reactions known.
Conditions to avoid: No further relevant information available.
Incompatible materials: No further relevant information available.

11. Toxicological Information

Acute effects: Not available.
Eye contact: Irritating effect.
Skin contact: No irritant effect. Sensitisation possible through skin contact.
Ingestion: Not available.
Inhalation: Not available.
Toxicity and irritation: Irritant

12. Ecological Information

Ecotoxicity: Toxic for fish.
Persistence and degradability: No further relevant information available.
Bioaccumulative potential: No further relevant information available.
Other adverse effects: Water hazard class 1: slightly hazardous for water.
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Also poisonous for fish and plankton in water bodies.
Toxic for aquatic organisms.

13. Disposal Considerations

General information

Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Disposal must be made according to official regulations.

14. Transport Information

ADG label required

HAZCHEM: No further relevant information available.
UN Number: UN3106
Proper shipping name: 3106 ORGANIC PEROXIDE TYPE D, SOLID, ENVIRONMENTALLY HAZARDOUS
Transport hazard class: Class 5.2 Organic peroxides
Packing group: III
Environmental hazard: Symbol (fish and tree)
Special precautions for users: Warning: Organic peroxides.
Danger code (Kemler): 30
EMS Number: F-J,S-R
Stowage Category: D
Stowage Code: SW1 Protected from sources of heat.
Segregation code:
SG35 Stow "separated from" acids.
SG36 Stow "separated from" alkalis.
Additional information: Limited quantities (LQ) 5L
Excepted quantities (EQ) Code: E1
Maximum net quantity per inner packaging: 30g
Maximum net quantity per outer packaging: 1000g
Transport category: 3
Tunnel restriction code: D/E

15. Regulatory Information

Poisons Schedule Number: 94-36-0 dibenzoyl peroxide S2, S4, S5
Other Information: A Chemical Safety Assessment has not been carried out.

16. Other Information

SDS preparation date: 27 November 2024
Comments: This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.