SAFETY DATA SHEET

Technovit® H7100 GMA Embedding Kit - Hardener II

Version 1Last reviewed 1 March 2026Catalogue: 14653 3, C031 3

1. Identification

Product Identifiers

Product Name: Technovit H7100 GMA Embedding Kit - Hardener II
Other Names: TECHNOVIT 7100 - HARDENER II
Product Number(s): 14653 3, C031 3
CAS Number: -

Recommended use of the chemical and restriction on use

Laboratory use.
Laboratory chemicals

Company Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

Emergency Contact Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

2. Hazards Identification

Classification of the substance or mixture

GHS07
Skin Irrit. 2 H315 Causes skin irritation.
Eye Irrit. 2 H319 Causes serious eye irritation.

Label Elements

Signal Words: Warning
Hazard Statement(s): Causes skin irritation.
Causes serious eye irritation.
Precautionary Statement(s): Wear protective gloves.
Wear eye protection / face protection.
Wash thoroughly after handling.

Primary route(s) of entry

Not available.

Human Health

Inhalation: Not available.
Ingestion: Not available.
Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Specific treatment (see on this label).
If eye irritation persists: Get medical advice/attention.
Skin: If skin irritation occurs: Get medical advice/attention.
Wash with plenty of water.
Take off contaminated clothing and wash it before reuse.

Environment

Not available.

3. Composition / Information on Ingredients

No information provided.

4. First Aid Measures

Ingestion: If symptoms persist consult doctor.
Inhalation: In case of unconsciousness place patient stably in side position for transportation.
Skin Contact: Immediately wash with water and soap and rinse thoroughly.
Eye Contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Other Information: Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.

5. Firefighting Measures

Suitable extinguishing equipment

Fire: CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
HAZCHEM: Not available.

Special protective equipment and precautions for fire fighters

No special measures required.

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures: Not required.
Environmental precautions: Dilute with plenty of water.
Do not allow to enter sewers/ surface or ground water.
Methods and materials for containment and clean up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Ensure adequate ventilation.

7. Handling and Storage

Precautions for safe handling: Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols.
Conditions for safe storage: Keep container tightly sealed.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls: No further relevant information available.

Personal protective equipment

Eye and face protection: Tightly sealed goggles.
Skin protection: Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Body protection: No information available.
Respiratory protection: In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.

9. Physical and Chemical Properties

General information

Appearance: White fluid
Odour: Odourless
pH: Not determined.
Vapour Pressure: Not determined.
Density: at 20 °C: 1.1 g/cm³
Boiling Point: 189 °C
Melting Point: Undetermined
Solubility: Fully miscible in water.
Specific Gravity of Density: Not determined.
Flash Point: 95 °C
Flammable (Explosive) Limits: Not determined.
Ignition Temperature: Product is not selfigniting.
Formula: Not available.

10. Stability and Reactivity

Reactivity: No further relevant information available.
Chemical stability: No decomposition if used according to specifications.
Possibility of hazardous reactions: No dangerous reactions known.
Conditions to avoid: No further relevant information available.
Incompatible materials: No further relevant information available.

11. Toxicological Information

Acute effects: No further relevant information available.
Eye contact: Irritating effect.
Skin contact: Irritant to skin and mucous membranes.
Ingestion: No further relevant information available.
Inhalation: No sensitising effects known.
Toxicity and irritation: Irritant

12. Ecological Information

Ecotoxicity: No further relevant information available.
Persistence and degradability: No further relevant information available.
Bioaccumulative potential: No further relevant information available.
Other adverse effects: Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for wate.r
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.

13. Disposal Considerations

General information

Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.
Recommended cleansing agents: Water, if necessary together with cleansing agents.

14. Transport Information

ADG label required

HAZCHEM: Not available.
UN Number: None.
Proper shipping name: Not regulated.
Transport hazard class: 0
Packing group: None.
Environmental hazard: No information available.
Special precautions for users: Not applicable.
Additional information: No information available.

15. Regulatory Information

Poisons Schedule Number: None of the ingredients is listed.
Other Information: No further relevant information available.

16. Other Information

SDS preparation date: 1 March 2026
Comments: This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.