Unimount Kit - Hardener

1. Identification

Product Identifiers

Product Name

Unimount Kit - Hardener

Other Names

Unimount (Hardener)

Product Number(s)

1234-B, 1234-H, EMS1234

CAS Number

Not available.

Recommended use of the chemical and restriction on use

Company Details

Emergency Contact Details

2. Hazards Identification

Classification of the substance or mixture

Label Elements

Signal Words

None

Hazard Statement(s)

• Hazard-determining components of labelling:
• 2-methylpentane-1,5-diamine
• 3-aminopropyldiethylamine
• Combustible liquid.
• Harmful if swallowed or if inhaled.
• Causes severe skin burns and eye damage.
• May cause an allergic skin reaction.

Precautionary Statement(s)

• Keep away from flames and hot surfaces. - No smoking.
• Do not breathe dusts or mists.
• Wash thoroughly after handling.
• Do not eat, drink or smoke when using this product.
• Use only outdoors or in a well-ventilated area.
• Contaminated work clothing must not be allowed out of the workplace.
• Wear protective gloves/protective clothing/eye protection/face protection.

Primary route(s) of entry

Human Health

Inhalation

Remove person to fresh air and keep comfortable for breathing.

Ingestion

Call a poison center/doctor if you feel unwell. Rinse mouth. Do NOT induce vomiting.

Eyes

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center/doctor.

Skin

(or hair) Take off immediately all contaminated clothing. Rinse skin with water/shower. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse.

Environment

3. Composition / Information on Ingredients

4. First Aid Measures

Ingestion

• Immediately call a doctor.
• Drink copious amounts of water and provide fresh air. Immediately call a doctor.

Inhalation

• Supply fresh air and to be sure call for a doctor.
• In case of unconsciousness place patient stably in side position for transportation.

Skin Contact

Immediately wash with water and soap and rinse thoroughly.

Eye Contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Other Information

• Immediately remove any clothing soiled by the product.
• Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.

5. Firefighting Measures

Suitable extinguishing equipment

Fire

CO₂, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

HAZCHEM

No further relevant information available.

Special protective equipment and precautions for fire fighters

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures

Wear protective equipment. Keep unprotected persons away.

Environmental precautions

• Dilute with plenty of water.
• Do not allow to enter sewers/surface or ground water.

Methods and materials for containment and clean up

• Absorb with liquid0binding material (sand, diatomite, acid binders, universal binders, sawdust).
• Use neutralising agent.
• Dispose contaminated material as waste according to item 13.
• Ensure adequate ventilation.

7. Handling and Storage

Precautions for safe handling

• Ensure good ventilation/exhaustion at the workplace.
• Prevent formation of aerosols.

Conditions for safe storage

Keep receptacle tightly sealed.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls

• Keep away from foodstuffs, beverages and feed.
• Immediately remove all soiled and contaminated clothing.
• Wash hands before breaks and at the end of work.
• Avoid contact with the eyes.
• Avoid contact with the eyes and skin.

Personal protective equipment

Eye and face protection

Tightly sealed goggles.

Skin protection

Protective gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Body protection

Protective clothing.

Respiratory protection

In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air.

9. Physical and Chemical Properties

General information

Appearance

Yellow liquid

Odour

Characteristic

pH

Not determined

Vapour Pressure

2.5 hPa

Density

0.8566g/cm³

Boiling Point

169°C

Melting Point

Undetermined

Solubility

Fully miscible.

Specific Gravity of Density

Not available.

Flash Point

75°C

Flammable (Explosive) Limits

Not determined

Ignition Temperature

260°C

Formula

Not available.

10. Stability and Reactivity

Reactivity

No further relevant information available.

Chemical stability

No decomposition if used according to specifications.

Possibility of hazardous reactions

No dangerous reactions known.

Conditions to avoid

No further relevant information available.

Incompatible materials

No further relevant information available.

11. Toxicological Information

Acute effects

• 15520-10-2 2-methylpentant-1,5-diamine
• Oral LD50 1690 mg/kg (rat)

Eye contact

• Strong caustic effect.
• Strong irritant with the danger of severe eye injury.

Skin contact

Strong caustic effect on skin and mucous membranes. Sensitisation possible through skin contact.

Ingestion

Swallowing will lead to a strong caustic effect on mouth and throat and to the danger of perforation of oesophagus and stomach.

Inhalation

No further relevant information available.

Toxicity and irritation

• Harmful
• Corrosive
• Irritant

12. Ecological Information

Ecotoxicity

No further relevant information available.

Persistence and degradability

No further relevant information available.

Bioaccumulative potential

No further relevant information available.

Other adverse effects

• Water hazard class 2: hazardous for water.
• Do not allow product to reach ground water, water course or sewage system.
• Must not reach bodies of water or drainage ditch undiluted or unneutralised.
• Danger to drinking water if even small quantities leak into the ground.

13. Disposal Considerations

General information

14. Transport Information

ADG label required

HAZCHEM

No further relevant information available.

UN Number

UN1760

Proper shipping name

1760 CORROSIVE LIQUID, N.O.S. (2-methylpentane-1,5-diamine, 3-DIETHYLAMINOPROPYLAMINE)

Transport hazard class

Class 8 Corrosive substances

Packing group

II

Environmental hazard

Not applicable.

Special precautions for users

• Warning: Corrosive substances
• Hazard identification number (Kemler code): 80
• EMS Number: F-A,S-B
• Stowage Category: B
• Stowage Code: SW2 Clear of living quarters.

Additional information

• DOT
• Quantity limitations:
• On passenger aircraft/rail: 1L
• On cargo aircraft only: 30L
• ADR
• Excepted quantities (EQ) Code: E2
• Maximum net quantity per inner packaging: 30mL
• Maximum net quantity per outer packaging: 500mL
• IMDG
• Limited quantities (LQ) 1L
• Excepted quantities (EQ) Code: E2
• Maximum net quantity per inner packaging: 30mL
• Maximum net quantity per outer packaging: 500ml

15. Regulatory Information

Poisons Schedule Number

None of the ingredients is listed.

Other Information

A Chemical Safety Assessment has not been carried out.

16. Other Information

SDS preparation date

17 May 2023

Comments

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.